Agilent N9952A, Keysight N9952A, HP N9952A
FieldFox Handheld RF & Microwave Combination Analyzer, 30 kHz - 50 GHz

Download Product Datasheet

Available Option Configurations

Config-01

• 210 - Vector Network Analyzer Transmission/Reflection
• 236 - Interference Analyzer and Spectrogram
• 307 - GPS receiver
• 351 - I/Q Analyzer (IQA)
• 030 - Remote Control Capability
• 211 - Vector Network Analyzer Full 2-port S-parameters
• 302 - External USB Power Sensor Support
• 309 - DC Bias Variable Voltage Source
• 330 - Pulse Measurements
• 356 - Noise Figure (NF)
• 370 - Over-the-Air (OTA) LTE FDD
• 377 - Over-the-Air (OTA) 5GTF
• 208 - USB Power Sensor Measurements Versus Frequency
• 235 - Pre-amplifier
• 310 - Built-in Power Meter
• 350 - Real-time Spectrum Analyzer (RTSA)
• 355 - Analog Demodulation
• 010 - Time Domain
• 209 - Extended Range Transmission Analysis (ERTA)
• 212 - Mixed-Mode S-Parameters
• 215 - TDR Cable Measurements
• 233 - Spectrum Analyzer
• 238 - Spectrum Analyzer Time Gating
• 308 - Vector Voltmer
• 312 - Channel Scanner
• MSRP: $161,497
• Available for Rental    GET QUOTE  

Product Overview

RENT KEYSIGHT / AGILENT N9952A RF & Microwave Combination Analyzer (Call for Availability)

FieldFox brings bench-level accuracy into the field by delivering precise handheld RF and microwave measurements that agree with benchtop analyzers. The FieldFox combo analyzer N9952A base function is a cable and antenna analyzer and can be configured to include a spectrum analyzer, real-time spectrum analyzer and full 2-port network analyzer. To save space in a field kit, built-in capabilities can be added to provide up to 10 instruments in 1. They’re equipped to handle routine maintenance, in-depth troubleshooting and anything in between. Better yet, FieldFox delivers precise microwave and millimeter-wave measurements - wherever you need to go.

To enhance spectrum analysis, the Keysight N9952A FieldFox includes the same PowerSuite measurements used in Keysight signal analyzers, enabling fast, accurate, one- button characterization of channelized communication systems. The InstAlign capability lets you instantly make accurate power measurements in the field, even when temperature fluctuates.  With FieldFox, you can measure both the 1-port cable loss and 2-port insertion loss. The N9952A FieldFox comes with a built-in calibration capability that allows you to calibrate the network analyzer without carrying a cal kit into the field. With any other test instrument, when you add additional devices to the test port, such as jumper cables or adapters, you need to recalibrate using a cal kit.

Specifications for the KEYSIGHT / AGILENT N9952A RF & Microwave Combination Analyzer Include:

See Datasheet for full specifications

Click to see all the models in this series