Anritsu S332D
SiteMaster, Cable and Antenna Analyzer, 25 MHz - 4 GHz

Download Product Datasheet

Product Overview

The Anritsu S332D SiteMaster Handheld Cable and Antenna Analyzer includes all the features of our popular S331D - with the addition of spectrum analysis for extra versatility in a single instrument. The standard cable & antenna analyzer spans from 25 MHz to 4 GHz. Option 02 and Option 16 extend the lower and upper frequency ranges of the cable & antenna analyzer to 2 MHz and 6 GHz respectively. Accurate, versatile, affordable, rugged and a true handheld at under 5 pounds (including battery), The Anritsu S332D Site Master is ideally suited for field technicians involved with installing, provisioning, maintaining, and troubleshooting wireless base station cable and antenna systems for such applications VHF, broadcasting, paging, cellular, PCS/GSM, 3G, ISM, WLAN and WLL.

The Anritsu S332D cable and antenna analyzer features spectrum analysis capability and optional power meter capability in addition to Return Loss/ SWR (aka VSWR, for Voltage Standing Wave Ratio) and Cable Loss measurements, as well as Distance to Fault (DTF) analysis using Frequency Domain Reflectometry (FDR). These capabilities give field engineers and technicians the ability to easily identify and solve RF system problems such as coverage, interference, and other path related signal problems. The S332D spectrum analysis ranges from 100 kHz to 3 GHz with smart button measurements - Field Strength, Occupied Bandwidth (OBW), Channel Power, Adjacent Channel Power Ratio (ACPR), Interference Analysis and Carrier-to-Interference ratio (C/I).

Other features include = 3.5 msec Sweep Speed Per Data Point to enable identification of intermittent problems in real time; broadband calibration from 25 MHz to 4 GHz for troubleshooting cable and antenna systems without multiple calibrations and calibration setups; and built-In Worldwide Signal Standards eliminating the need to manually input start and stop frequency values. The High Accuracy Power Meter (Option 19) provides true RMS measurements from 50 MHz to 6 GHz. This is the ideal solution for accurate measurements of both CW and modulated signals.

Wireless Network Field Measurement Applications include:

• Cable and antenna testing for VHF, broadcasting, paging, cellular, PCS/GSM, 3G, ISM, WLAN and WLL applications.
• Return Loss measurement
• Distance-To-Fault measurement
• Cable loss measurement Interference Detection and Analysis
• Rapid sweep speed to detect interference
• AM/FM/SSB detection
• Interfering signal type determination helps quickly determine source of cellular interference Base Station Transmitter Performance Testing
• Channel power
• Adjacent Channel Power Ratio
• Occupied Bandwidth

Features of the Anritsu S332D SiteMaster include:

• Handheld, battery-operated design
• Weighs less than 5 lbs. (including battery)
• Built-in worldwide signal standards and frequency channels
• Superior Immunity to RF interference
• Locate long range problems with 517 data points
• Pop-up cable menus containing over 95 cable types * Multilingual User Interface; English, French, Chinese, Japanese, Spanish, German
• Intuitive and easy to use with On-Screen Test Set-Ups
• Saves 15 to 35 Measurement Test Set-Ups (10 VNA, 5 SPA/Opt 21, 5 each Option 19/25/27/29)
• Saves up to 300 Measurement Traces
• Alphanumeric Labeling of Saved Measurements
• Automatic Time and Date Stamp of Saved Data
• Rechargeable, Field Replaceable Battery
• Distance Measurement in Feet and Meters
• Information Screens Provide Cable Attenuation and Velocity of Propagation values
• 6 Markers, Limit Lines, and Segmented Limit Lines
• RS232 Interface

Spectrum Analysis features of the S332D Site Master include:

• Built in pre-amplifier (standard)
• Noise Level < - 135 dBm typical
• Resolution Bandwidth: 100 Hz to 1 MHz in 1-3 sequence
• Video Bandwidth: 3 Hz to 1 MHz in 1-3 sequence
• Dedicated smart measurements
• + 43 dBm maximum safe input level

Other models in this series:

Anritsu S331D SiteMaster, Cable and Antenna Analyzer