Agilent 6626A, Keysight 6626A, HP 6626A
Power Supply, Quad, 7V, 15mA / 16V, 200 mA / 50V, 500mA / 50V, 1A or 16V, 2A

Download Product Datasheet

Product Overview

The Keysight 6626A (Agilent) is a Precision Power Supply, 25W or 50W with Quad Outputs. The Keysight 6626A (Agilent) Power Supply helps to reduce test time with fast up and down programming, which is enhanced by the active down-programmer which can sink the full rated current. The Agilent 6626A Power Supply is very useful on the R&D bench as well. The accuracy of both the programming and the measurement systems allow precise control and monitoring of prototype bias power.

Features and Specifications of the Keysight 6626A (Agilent) Power Supply include:

• Four Isolated Outputs:
• Integrated into the power supply
• Conserves rack space and GPIB addresses
• Dual Ranges allow for more current at lower voltage levels
• Outputs can be connected in parallel or series to further increase flexibility to the system designer
• Programming is done using industry standard SCPI commands
• Test system integration is simplified by using the VXIPlug&Play drivers
• Extensive Protection Features protect valuable prototypes including very fast CV/CC crossover
• Controlled from either the front panel keypad or, for automated testing, from the GPIB
• Output Ratings (2 outputs each)
• Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA
• Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA
• High range volts, amps 25W: 0 to 50 V, 0 to 500 mA
• High range volts, amps 50W:
• 0 to 50 V
• 0 to 1 A or 0 to 16V
• 0 to 2 A
• Programming Accuracy (2 outputs each)
  
  • Voltage 25W:
  • 1.5 mV + 0.016% (low)
  • 10 mV + 0.016% (high)
  • Voltage 50W:
  • 3 mV + 0.016% (low)
  • 10 mV + 0.016% (high)
  • Current 25W:
  • 15 µA + 0.04% (low)
  • 100 µA + 0.04% (high)
  • Current 50W:
  • 185 µA + 0.04% (low)
  • 500 µA + 0.04% (high)
• Ripple & Noise (2 outputs each)
  • Constant voltage rms: 500 µV
  • Peak-to-peak: 3 mV
  • Constant current rms: 0.1 mA
• Readback Accuracy (2 outputs each)
  
  • Voltage 25W:
  • 0.016% + 2 mV (low)
  • 0.016% + 10 mV (high)
  • Voltage 50W:
  • 0.016% + 3.5 mV (low)
  • 0.016% + 10 mV (high)
  • +/-Current 25W:
  • 0.03% + 15 µA (low)
  • 0.03% + 130 µA (high)
  • +/-Current 50W:
  • 0.04% + 250 µA (low)
  • 0.04% + 550 µA (high)

Click to see all the models in this series