Rent or Buy Sorensen SGA800-25 DC Power Supply, 800V, 25A, 20kW



Tektronix Encore




Sorensen SGA800-25
DC Power Supply, 800V, 25A, 20kW

Power Supplies >> DC Power Supplies, High Voltage (60V and up), Low Current (less than 60A) >> DC Power Supply, 800V, 25A, 20kW
Rent Used Test Equipment
Manufacturer: Sorensen
Model: SGA800-25

Sorensen SGA800-25 DC Power Supply, 800V, 25A, 20kW

Electronic Test and Measurement Equipment

Sorensen SGA800-25 DC Power Supply, 800V, 25A, 20kW Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT SORENSEN SGA800-25 DC Power Supply (call for availability)

The Sorensen SGA800-25 DC Power Supply is a high powered, programmable power supply designed for exceptional load transient response, low noise, and the highest power density in the industry. The power density is enhanced by a stylish front air intake allowing supplies to be stacked without any required clearance between units.

The Sorensen 
SGA800-25 DC Power Supply (SGA = Sorensen General Purpose Analog), with its high performance power electronics, meets the need for simple front panel analog controls or external control. It provides essential features like 10-turn potentiometers for setting voltage and current, 3 ½ digit LED readout, plus front panel over-voltage protection (OVP) preview/adjustment and reset.

Features and Specifications of the Sorensen
SGA800-25 DC Power Supply include:

  • High Power Density: Up to 30 kW in a 6U chassis
  • Wide Voltage Range: 0-10V up to 0-800V, in increments of 3 kW from 5 to 30 kW
  • Fast Load Transient Response: Protection from undesired voltage excursions
  • Low RMS and P-P Noise:  Suitable for the most sensitive applications
  • Parallelable up to 150 kW: Expandable as your requirement grows
  • Modular Design: Upgradeable for the ultimate in investment protection
  • 16-bit Resolution:  Optional IEEE-488.2 + RS-232C + Ethernet provides precise control

Common:

  • Remote Sense:  Terminals are provided to sense output voltage at point of load. Maximum line drop 5% of rated voltage per line for 40-100V models, line drop 1V of rated voltage per line for 10-20V models, 1.5V for 30V models, 2% of rated voltage per line for models 160V and greater. (Greater line drop is allowed, but output regulation specifications no longer apply).
  • Parallel Operation:  Up to 5 units may be paralleled for additional current within the power supply single-unit specifications, with exception of the DC output current set accuracy. Additional paralleled SG units will add 0.3% inaccuracy per unit. To parallel more than 5 units, contact factory.
  • Series Operation:  Up to 2 units

Input:

  • Nominal Voltage 3 phase, 3 wire + ground
      • 208/220 VAC (operating range 187 - 242 VAC)
      • 380/400 VAC (operating range 342 - 440 VAC)
      • 440/480 VAC (operating range 396 - 528 VAC)
  • Frequency:  47 – 63Hz , 400Hz
  • Power Factor
      • >0.9 typical for 208/220 VAC input (10V - 800V)
      • >0.78 typical for 380/400 VAC input (40V - 800V)
      • >0.9 typical for 380/480 VAC input (10V - 30V)
      • >0.7 typical for 440/480 VAC input (40V - 800V)
      • >0.9 typical for 440/480 VAC input (10V - 30V)
  • Protection:  ½ cycle ride-though on all three phases, 3 cycle ride through on single phase; missing phase shutdown (800V model 6.4 msec on all 3 phases)

Output:

  • Voltage and Current Range: 800V, 25A, 20kW
  • Ripple & Noise:
      • rms(20Hz-300kHz): 80mV
      • p-p: 500mV

Programming & Read-Back Specifications:

  • Front Panel Display:
    • Programming:
      • Accuracy: +/- (0.5%fs + 1 digit)
      • Resolution: 3.5 digits
    • Read-Back Monitoring:
      • Accuracy: +/- (0.5%fs + 1 digit)
      • Resolution: 3.5 digits
    • Knob control & Display read-back
  • Remote Analog Interface
    • Programming:
      • Accuracy:
        • Voltage: +/-0.25% of full scale
        • Current: 0.8% of full scale 
    • Read-Back Monitoring:
      • Accuracy: +/-1.0% of full scale
    • 25-pin D-sub connector (0~5 V or 0~10 V)
  • Remote Digital Interface:
    • Programming:
      • Accuracy:
        • Voltage:  +/- 0.1% of full scale
        • Current: +/- 0.4% of full scale
      • Resolution: +/-0.002% of full scale
    • Read-Back Monitoring:
      • Accuracy:
        • Voltage:  +/- 0.15% of full scale
        • Current:  +/- 0.4% of full scale
      • Resolution:  +/-0.002% of full scale
    • RS-232C (Standard on SGI), Optional IEEE-488.2 and Optional LXI Compliant 10/100 base-T Ethernet
  • OVP:
    • Programming:
      • Accuracy: +/- 1% of full scale
      • Resolution: +/-0.002% of full scale
    • Programming range: 5-110% Configured from front panel, remote analog or via optional digital inputs
  • User I/O:
    • Disconnect & Polarity-reversal relay control (Only available with Ethernet Option)

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST


Testimonials

As always - thanks for your rapid response and support.


-- Dave O.
Tuscon, AZ







Why Choose Axiom?


Your testing is complicated enough, we want to make sourcing test equipment the easy part.


Dedicated Customer Service
We go beyond the role of order taker & strive to partner with you to provide a custom solution.
Competitive Prices
Equipment is agressively priced. We work with you to find a solution to fit your budget.

Fast Turnaround
No long drawn-out sales process, We help you find the equipment you need, and get through order processing quickly so your equipment ships out fast!

Warranty & Support
Comprehensive Parts and Labor warranty on all equipment sold. Includes a user manual, is fully accessorized, and tested to manufacturer specifications prior to shipment.

Testimonials

I really appreciate the quick turnaround, we queried early afternoon and are able to have the rental test equipment here within 20 hrs. Thank you for making that happen.

-- Kabul S.
Chandler, AZ


Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    



YouTube Facebook
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2022 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2022 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081

Phone: (760) 806-6600