Tektronix TCP404XL
Probe, AC/DC current, DC to 2 MHz, 500 A DC

Download Product Datasheet

Available Option Configurations

Config-01

• No Options Included
• MSRP: $6,270 | Available for Rental    GET QUOTE  

Product Overview

TEKTRONIX TCP404XL PROBE

The Tektronix TCP404XL Current Probe is a split-core probe that uses both transformer and Hall effect technology. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ TPA-BNC) interfaces, the Tektronix TCP404XL probe makes current measurements and calculations simple and easy.

Features and Specifications of the TCP404XL Current Probe include:

• Features:
  • AC/DC measurement capabilities
  • Automatic Scaling and Units
    • Requires a TDS TEKPROBE oscilloscope or a TekConnect oscilliscope with TCA-BNC
    • Oscilloscope on-screen readout of magnitude and amps
    • Reduces measurement errors with no more hand calculations
  • AC/DC input coupling
  • Low insertion impedance reduces DUT loading
  • Split-core design allows easy circuit connection
  • Status Indicators provide visual operating status and notification of potential error conditions including:
    • Degauss, Probe open, Overload, Not terminated into 50 Ω, Noncompatible probe type
  • Lower DC drift and noise allows improved low-level current measurements
  • Complies with IEC standards
  • Applications:
    • Development and analysis solutions for designers, installers, and service personnel in Telecomm, Data Comm, computer, and semiconductor power electronics environments for:
      • Power supplies (switching and linear)
      • Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
      • Power Inverters/Converters
      • Electronic ballasts
      • Industrial/Consumer electronics
      • Mobile communications (phone, satellite, relay stations)
      • Motor drives
      • Transportation systems (electronic vehicles and trains, locomotives, avionics)
• Specifications of TCP404XL Probe w/ TCPA400 Amplifier:
  • Characteristic:
    • Bandwidth (-3 dB):  DC - 2 MHz
    • Rise Time:  ≤175 ns
    • Maximum Current Ratings: 
      • High-current Sensitivity Range: 1 A/mV Range:
        • DC (continuous):  500 A
        • RMS (sinusoidal):  500 A
        • Peak Pulse:  750 A
    • DC Accuracy (operating temp 0 °C to 50 °C):  ±3% of reading
    • DC Accuracy, typical (operating temp 23 °C ±5 °C):  ±1% of reading
  • Nominal:
    • Maximum Bare Wire Voltage:
      • 600 V_RMS CAT I & II
      • 300 V_RMS CAT III
    • Lowest Measurable Current (at ±3% accuracy at DC):
      • 1 A
      • Scope set to 1 mV/div and 20 MHz BW limited
    • Insertion Impedance:
      • 0.1 mΩ at 10 kHz
      • 0.6 mΩ at 100 kHz
      • 8 mΩ at 1 MHz
      • 16 mΩ at 2 MHz
    • Maximum Amp-Second Product (based on amplifier range setting):
      • NA – 1 A/mV
    • AC-coupling Low-frequency Bandwidth (Low Pass – 3 dB point): 
    • Displayed RMS Noise (at 20 MHz bandwidth limit):  ≤250 mA_RMS
    • Signal Delay (delay to output BNC):  80 ns
    • Probe Amplifier Inputs:  1
    • Probe Open Indicator:  Yes
    • Overload Indicator:  Yes
    • Termination Indicator:  Yes
    • Noncompatible Probe Indicator:  Yes