Agilent N5222A, Keysight N5222A, HP N5222A
PNA Network Analyzer, 10 MHz - 26.5 GHz, 2 or 4-ports
Network Analyzers >> More than 20 GHz, up to 40 GHz >> PNA Network Analyzer, 10 MHz - 26.5 GHz, 2 or 4-ports
Model: N5222A
|
Download Product Datasheet
Product Overview
KEYSIGHT N5222A
The Keysight N5222A Network Analyzer (PNA Series) is the highest-performing microwave network analyzer in the industry for passive and active device test with a frequency range of 10 MHz to 26.5 GHz and offers many advanced measurement applications.
The Keysight N5222A Network Analyzer is used to test a wide variety of passive and active devices such as filters, duplexers, amplifiers and frequency converters as well as millimeter-wave, signal integrity and materials measurements.
The N5222A provides high-power sources and the best linear receivers available (at time of product introduction), giving it the most accurate S-parameter measurements with the widest power range in the market.
Key features and specifications of the N5222A PNA Network Analyzer include:
- 10 MHz to 26.5 GHz frequency range
- 2-ports with single source or 4-ports with two built-in sources
- 127 dB system and 132 dB receiver dynamic range, 100,001 points, 200 channels, 15 MHz IF bandwidth
- High output power (+13 dBm) and a wide power sweep range (38 dB)
- Best dynamic accuracy: 0.1 dB compression with +12 dBm input power at the test port
- Low noise floor of -114 dBm at 10 Hz IF bandwidth
With the Keysight N5222A VNA, a wide variety of applications of any network analyzer:
- S-parameters (CW and pulsed)
- Noise figure
- Gain compression
- Intermodulation and harmonic distortion
- Conversion gain/loss
- True-differential stimulus
- Millimeter-wave
- Material measurements
- Signal integrity
- Antenna test
REQUEST A QUOTE
| Testimonials |
|
As always - thanks for your rapid response and support. -- Dave O. Tuscon, AZ |
