RENT STANFORD RESEARCH FS725 Rubidium Frequency Standard (Call for Availability)
The Stanford Research FS725 integrates a rubidium oscillator, a low-noise AC power supply, and distribution amplifiers in a compact, half-width 2U chassis. It provides stable and reliable performance with an estimated 20 year aging of less than 5 × 10–9, and a demonstrated rubidium oscillator MTBF of over 200,000 hours. The FS725 is an ideal instrument for calibration and R&D laboratories, or any application requiring a precision frequency standard. There are two 10 MHz and one 5 MHz outputs with exceptionally low phase noise (–130 dBc/Hz at 10 Hz offset) and one second Allan variance.
Up to three internal distribution modules can be added to the Stanford Research FS725. Each module has four 10 MHz outputs, one 5 MHz output, and one 1 pps output, all with the same low phase noise, harmonic distortion and jitter. An RS-232 interface allows direct communication with the rubidium oscillator. Using the provided Windows software, you can easily monitor and control 1 pps timing, and determine the instrument’s operational status. There are two alarm relays that indicate the status of the rubidium oscillator lock state and synchronization to an external 1 pps input. The relays are SPDT, providing both normally-open and normally-closed contacts.
Specifications for the STANFORD RESEARCH FS725 Rubidium Frequency Standard Include:
Output frequencies | 10MHz sine, 5MHz sine, 10µs wide 1 pps pulse |
Amplitude | 0.5Vrms, ±10% |
Harmonics | <–60 dBc |
1 pps pulse amplitude | 2.5V into 50Ω, 5V into High-Z loads |
See Datasheet for full specifications
Testimonials |
It has been a pleasure doing business with Axiom. -- Jim P. New Mexico |