Tektronix Encore

Yokogawa DL850V
ScopeCorder Vehicle Edition

Data Acquisition and Recorders >> Recorders >> ScopeCorder Vehicle Edition
Rent Used Test Equipment
Manufacturer: Yokogawa
Model: DL850V

Yokogawa DL850V ScopeCorder Vehicle Edition

Electronic Test and Measurement Equipment

Yokogawa DL850V ScopeCorder Vehicle Edition Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview


The Yokogawa DL850V ScopeCorder Vehicle Edition has all of the powerful features that the DL850 model does, including high speed sampling, high isolation withstand voltage, and multichannel measurements, but it has been enhanced with greater capabilites for vehicle design and development such as CAN and LIN buses monitoring. Like the DL850, this ultra-fast memory recorder is a modular, wavefrom recording instrument that can concurrently measure voltage, current, strain, acceleration, and even more phenomena.

Features and Specifications of the Yokogawa DL850V ScopeCorder Vehicle Edition include:

  • Enhanced Capabilities:
    • Displays CAN- and/or LIN- protocol communication data as trend waveforms on the display by using:
      • CAN Bus Monitor Module 720240 or
      • CAN & LIN Bus Monitor Module 720241
    • Trigger on decoded waveforms
    • Evaluate a vehicle's overall LAN system by identifying the correlation between communication data on the vehicle-installed LAN and analog data
      • data such as voltage, temperature, and sensor signals
      • or the ECU's control logic signal
    • Can be driven by DC power (i.e. vehicle's battery) in addition to AC power (with /DC Option)
  • Features:
    • High-speed:  up to 100 MS/s
    • High Resolution:  up to 16-bit
    • Isolated:  Up to 1kV with the isolated probe 700929 or 701947
    • Multi-channel:  Up to 128 Voltage/Temperature or 128 logic bits
    • Continuous hard disk recording:  at 100 kS/s simultaneously on 16 channels with the /HD0 or /HD1 option
    • 17 plug-in modules allows for flexible assorted measurements
    • Large (2 GPoint) memory offers long duration measurement and two instantaneous zoom locations
    • Yokogawa isoPRO technology™ - High speed and high withstand voltage isolation technology
      • Offers industry-leading isolation performance at the highest speeds
      • Fast inverter signals
      • Performance needed to develop high efficiency inverters, which employ high voltages, large currents, and high operating speeds
      • Provides accurate observation of inverter startup waveforms with sufficient time resolution
      • Allows the the ability to confirm that no excessive overshoots occured
    • Backwards-compatible with all modules of its predecessor, the DL750
    • Dual Capture Function:
      • Record at two different sampling rates
      • Catch transients in durability with high-speed sampling
      • Very effective when performing vibration testing of connectors under varying temperatures
      • Chattering is accurately captured at high-speed sampling
      • Check the frequency of occurence at low-speed sampling
  • Specifications:
    • Input Section:  Plug-in module
    • Number of slots:
      • 8
      • Max 4 for 720210 modules
      • Max 2 for 720240 and 720241 modules
    • Number of input channels:
      • 120CH/Slot
      • 336CH/Unit
      • Maximum simultaneous display is 64 waveforms x 4 screen selectable
    • Max recording length:  Depends on kinds of modules and number of channels
      • Standard:
        • 250 Mpts(1 Ch)
        • 10 Mpts/Ch (16 CH)
      • With M1 Option:
        • 1 Gpts (1 CH)
        • 50 Mpts/CH (16 CH)
      • With M2 Option:
        • 3 Gpts (1 CH)
        • 100 Mpts/CH (16 CH)
    • Trigger mode:  auto, auto level, normal, single, single(N), ON start
    • Trigger level setting range:  0 centered ±10div
    • Display:  10.4-inch TFT color LCD monitor, 1024×768(XGA)
    • History Memory:  Maximum 5000 pages
    • Storage:
      • SD card slot:  Memory cards conforms to SD, SDHC, maximum capacity 16GB
      • USB memory:  Mass storage deivce which conforms to USB Mass Storage Class Ver. 1.1
    • General Specifications:
      • Rated power supply voltage:  100 to 120VAC/220 to 240VAC (automatic switching)
      • Rated power supply frequency:   50/60Hz
      • Maximum power consumption:  200VA
      • Withstand voltage:  1500V AC between power supply and earth for 1 minute
      • Insulation resistance:  10MΩ or higher at 500V DC between power supply and earth
    • Modules:
      • 701250 High-speed 10 MS/s 12-Bit Isolation Module (2 ch)
      • 701251 High-speed 1 MS/s 16-Bit Isolation Module (2 ch)
      • 701255 High-speed 10 MS/s 12-Bit non-Isolation Module (2 ch)
      • 701260 High-voltage 100 kS/s 16-Bit Isolation Module (with RMS, 2 ch)
      • 701261 Universal Module (2 ch)
      • 701262 Universal Module (with Anti-Aliasing Filter, 2 ch)
      • 701265 Temperature/high-precision voltage Module (2 ch)
      • 701270 Strain Module (NDIS, 2 ch)
      • 701271 Strain Module (DSUB, Shunt-CAL, 2 ch)
      • 701275 Acceleration/Voltage Module (with Anti-Aliasing Filter, 2 ch)
      • 701280 Frequency Module (2 ch)
      • 720210 High-speed 100 MS/s 12-Bit Isolation Module (2 ch)
      • 720220 Voltage Input Module(16 ch)
      • 720230 Logic Input Module (16 ch)
      • 720240 CAN Bus Monitor Module (32 ch, available DL850V only)

Request A Quote

Rent      Buy      Repair


Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    

YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE

© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600