RENT IET LABS 7660 Precision LCR Meter (Call for Availability)
The IET Labs 7660 Precision LCR Meter performs precision impedance measurements over a frequency range of 10 Hz to 2 MHz. The LCR Meter can measure 14 different impedance parameters with 0.05% accuracy, meeting today’s requirements for component and material testing. The ease of use and user-friendly menu programming makes the 7660 ideal for applications in product development, incoming inspections, or production line testing. The IET Labs 7660 produces fast and accurate swept parameter measurements, graphical or tabular, for verification of component and material response to changes in ac test frequency, ac test voltage or ac test current, without the need for complex programming or an external controller.
The IET Labs 7660 Precision LCR Meter graphical TFT display takes advantage of being full color. When pass and fail are being used not only do the Pass/Fail LEDs light but the measured value also changes color to indicate pass or fail. Test setups can be stored and recalled from internal memory or USB memory stick, measured data can be stored on a memory stick and then transferred to PC for data reduction and analysis. The IET Labs 7660 has a built-in calibration procedure, which can be performed using the SI traceable calibration kit (7000-09). The results and the date of the calibration are stored internally.
Specifications for the IET LABS 7660 Precision LCR Meter Include:
Frequency Range | 10 Hz to 2 MHz |
Frequency Resolution | 6 digits or 0.05 Hz |
DC Bias Voltage | 2.0V Internal, 0 - ±200V External |
Source Impedance | 25Ω, 400Ω, 6.4kΩ, or 100kΩ, range dependent |
See Datasheet for full specifications
Testimonials |
Wow, you are good! Thanks for all the information and thank you for your help! Much appreciated! -- Carolyn Maryland |