Tektronix Encore




Haefely PCD130
3-Phase Coupling / Decoupling Network

Compliance Testing - EMC, ESD, EMI, RFI >> EMC, EMI and RFI Test Systems and Analyzers >> 3-Phase Coupling / Decoupling Network
Rent Used Test Equipment
Manufacturer: Haefely
Model: PCD130

Haefely PCD130 3-Phase Coupling / Decoupling Network

Electronic Test and Measurement Equipment

Haefely PCD130 3-Phase Coupling / Decoupling Network Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT Haefely PCD130 (call for availability)

The Haefely PCD130 CDN, as part of the PSURGE 8000 system is tailored to meet IEC and EN standards to cover testing of 3 phase AC and DC power ports. These standards include recommendations for the coupling and decoupling component values within the CDN. These values are largely based on the European model for AC power lines. PCD 130 includes all the IEC and EN requirements with automatic coupling path switching. PCD 130 EUT output has specially designed 4mm connectors, which provide enhanced personnel safety in relation to the high voltage impulse.

ANSI / IEEE standards are the reference for power line tests in many American standards such as TIA-968-A (FCC part 68) and Telcordia (Bellcore) GR-1089-CORE. The ANSI standard contains much the same information as the IEC but based around the American experience with AC power lines.

Impedance of the low voltage mains supply to earth is simulated by the addition of a 10 ohm resistor for IEC tests. ANSI has NO series resistor in the impulse path This difference comes from the practice in Europe of connecting ground to neutral at the distribution transformer, not the power service entry as in the USA. The Haefely PCD 130 automatically sets the correct coupling elements for either IEC or ANSI as selected by the user.

The integration in the WinFEAT&R control and reporting software package enhances an efficient set-up and operation of the Haefely PCD130. Most importantly, the test load can be transferred to a computer freeing valuable resources.

Features of the Haefely PCD130 3-Phase Coupling / Decoupling Network include:

  • Three high voltage inputs
  • Combination wave 1.2/50us - 8/20us
  • Ring wave 100kHz
  • 8kV impulse voltage
  • Line voltage 690Vac phase-phase
  • 32A EUT Current per phase
  • Phase angle synchronization for each path

Highlights of the Haefely PCD130 include:

  • International application – Specifically designed to meet and exceed the requirements of IEC, EN, and ANSI tests for power line applications.
  • Synchronization path Switching - The PCD 130 synchronizes impulses with the selected coupling path. Safe and Easy - The interlocked HV connections allow your operators to test safely and easily.
  • Full 32A capability – Both AC and DC loads up to 32A per phase can be connected through the PCD 130.
  • Sturdy and Reliable – Careful component selection ensures that the PCD 130 will continue to operate under the most strenuous testing regime.
  • Faster completion of testing program - The PCD 130 has 3 multiplexed inputs, enabling testing to continue with other pulses without having to remove power from the EUT.

Applications include:

  • Single & Three phase power line systems
  • IEC 61000-4-5 Edition 1 & 2 Power line testing
  • IEC 61000-4-12 Power line testing
  • ANSI C62.41 & C62.45 Power lines
  • Many IEC & EN Product standards

Specifications of the Haefely PCD130 include:

  • Maximum Impulse Voltage 8kV
  • Maximum AC Voltage 690VRMS (Phase – Phase)
  • Maximum DC Voltage 110V
  • Maximum AC Current 32ARMS
  • Maximum DC Current 32A
  • Residual voltage at Test supply input max. 15% of the applied impulse voltage
  • EUT Connections 4mm HV Safety sockets
  • Phase Sync. Follows coupling path
  • Phase Sync accuracy ±1°
  • Coupling Elements and paths Controlled by the PSURGE 8000
  • Power Supply 85 – 264V 50/60Hz
  • Voltage drop due to the decoupling inductors +/- 10% with max. current and cos f +/- 0.7

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    



YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600