Thermonics T-2500SE
Temperature Forcing System, -90C to 225C

Download Product Datasheet

Product Overview

THERMONICS T-2500SE

The Thermonics T-2500SE Precision Temperature Forcing System set a higher standard for performance and value than other available systems when it was introduced. The T-2500 series offers a variety of design and performance options to meet the needs of an assortment of test specifications. Variations in arm design coupled with different strategies in the heating and cooling mechanism, provide a wide variety of available systems. The T-2500SE, has a temperature range of -90C to 225C and can transition air temperatures between +125C and -55C in as little as 4 seconds.

Core features of the Thermonics T-2500SE Temperature Forcing System include:

• Intelligent Touch-Screen Interface
• Sophisticated Temperature Cycling
• Temperature profiles are easily set up on the touch screen. Profiles can be saved and recalled for use or export. Data entered can be as simple as two temperatures and soak times, or as intricate as a 99 step cycle - each with a unique temperature, soak time, or ramp rate. T-2500 products may be used for temperature cycling per MIL STD-883C for thermal stressing of semiconductor devices.
• Easy PM and Calibration
• Calibration of the system is facilitated by a series of software screens that guide you through the procedure in a systematic manner. In addition, diagnostics screens report system malfunctions in an easy to understand format that assists with servicing of the system.
• ATE Compatibility (IEEE-488.2)
• Efficient Air Dryer
• To ensure the use of clean and dry air, a built-in air dryer removes water vapor and particles from the compressed air source. This heatless air dryer lowers the dew point of the source air to approximately -80C.
• ESD Protection
• On-Screen Graphics
• Precise Temperature Control
• DUT Sensor
• The case temperature of the DUT can be controlled with the use of the DUT sensor (K-type or T-type). This feature makes it possible to control the temperature of the DUT to within ±1C of the desired temperature setpoint. In addition, an advanced temperature control algorithm assures the DUT is quickly stabilized at temperature.
• Integrated Thermal Test Head and Motorized Arm

Specifications of the Thermonics T-2500SE include:

• Temperature Range: -90C to 225C
• Accuracy: ±1.0C
• Stability: ±0.3C
• Displayed Resolution: 0.1C
• Transition time: 4 seconds (+125C to -55C)
• Single heater thermal head with motorized up/down boom. Manual in/out arm.
• Full-featured system that is economically priced.
• Method of Cooling: Forced air with single-stage mechanical refrigeration and multi-stage self-cooling heat exchanger. NonCFC based refrigerants are used - environmentally safe.
• Method of Heating: Forced air with in-line air heaters.
• Temperature sensor: Device Under Test (DUT), K-type and T-Type thermocouples. Also, K-type thermocouple for air temperature. P-N junction for V_f temperature control.
• Fail safes: Snap-disc thermostats, air flow sensors and thermocouples. Over-temperature limit of 245C.
• AC Input Requirement: 200–230VAC, 50/60 Hz, 1 Phase, 20A
• AIR INPUT REQUIREMENTS
• Pressure: 80-110 PSIG (5.7 - 7.8 Kg/Cm2 )
• Flow Rate: 18 SCFM (8.6 liters/sec)
• Dew Point: Less than 10C at 80 PSIG (5.7 Kg/Cm2 )
• Quality: Clean air; free of oil, moisture and particles
• OUTPUT AIR FLOW 200 to 900 SCFH (1.6 to 7.08 liters/sec.). Flow is under software control.
• Dimensions: 55"H x 25"W x 28"Depth
• Weight: 350 lbs.

Click to see all the models in this series