Rent or Buy Narda SRM-3006 Selective Radiation Meter, 9 kHz - 6 GHz

Tektronix Encore

Narda SRM-3006
Selective Radiation Meter, 9 kHz - 6 GHz

Telecommunication and Wireless >> RF Safety (Radiation Meters) >> Selective Radiation Meter, 9 kHz - 6 GHz
Rent Used Test Equipment
Manufacturer: Narda
Model: SRM-3006

CLICK TO ENLARGE Narda SRM-3006 Selective Radiation Meter, 9 kHz - 6 GHz

Electronic Test and Measurement Equipment

Narda SRM-3006 Selective Radiation Meter, 9 kHz - 6 GHz Product Datasheet Download Product Datasheet             Narda SRM-3006 Selective Radiation Meter, 9 kHz - 6 GHz Product Datasheet 2 Download Product Datasheet 2

Rent Test Equipment

Available Option Configurations


  • 3501/03 - Three Axis E-Field Antenna, 27 MHz - 3 GHz
  • MSRP: $38,375 | In Stock!    GET QUOTE  

Product Overview


The Narda SRM-3006 Selective Radiation Meter is the 2nd generation hand-held system for narroband analysis of electromagnetic fields, produced by Narda. Differentiating itself from the Narda NBM-520, NMB-550 and NBM-580 Broadband Radiation Field Meters, the SRM-3006 has the ability to give you the results of individual emitters and also generate a total of all emitters. The SRM-3006 allows you to verify compliance with the US FCC 5% Rule, as well as accurately detect fields well below domestic and international standards. The Narda SRM-3006 also has the ability to measure fields more accurately than broadband test equipment, and perhaps more importantly, it is able to give the user more information than just the total emissions; you will know precisely what emitter or emitters are generating the most power.

At the time of this writing, there is no other measurement system in the world that provides all the information and accuracy as the Narda SRM-3006. The US version of the SRM3006 includes the basic unit, and a 2-axis, E-field antenna (27 MHz to 3 GHz and works down to 200 µV/m). The meter is essentially a Spectrum Analyzer which covers the 9 kHz to 6 GHz spectrum, which has been enhanced to also make accurate field strength measurements. The SRM-3006 can be used with any compatible antenna, but is optimized to work specifically with Narda's calibrated high-performance antennas. 

The Narda SRM-3006 is portable, rugged, splash-proof, incorporates a very readable color display, GPS Receiver and microphone for voice editing, and includes the SRM-TS software package. Additional antennas are available.


Features of the Narda SRM-3006 include:

  • Measurements conforming to ICNIRP and national standards with results displayed directly in terms of the permitted limit value
  • Fast, reliable results using predefined measurement routines, setups, and automatic settings
  • LTE and UMTS operating modes for evaluating pilot signal information and extrapolation to maximum exposure levels
  • Scope mode for short term analysis of pulsed signals and long term recording of variable exposure levels
  • Editable tables for automatic correlation of results with telecommunications services (e.g. broadcasting, GSM, WiMAX)
  • Individual preparation of field campaigns with subsequent evaluation and handling of large quantities of measurement data
  • Suitable for outdoor use: Radiation protected, robust, splash-proof, ergonomically designed; uses exchangeable rechargeable batteries; equipped with integrated GPS and voice recorder


Operating modes of the SRM-3006 include:

Safety Evaluation

For a fast overview of the exposure levels due to individually definable frequency ranges, services and providers as absolute values or automatically evaluated according to common human safety standards.


Spectrum Analysis

for detailed analysis of the fields in the frequency domain with all the facilities of a full function spectrum analyzer.


Level Recorder

for fast, direct display of the time characteristics of a signal at a settable fixed frequency with bandwidths up to 32 MHz.


Scope (option)

for real time graphical display of pulsed signals versus time similar to an oscilloscope, with resolutions from microseconds right up to 24 hours.


UMTS P-CPICH Demodulation (option)

for selective detection of the field components due to individual cells, with extrapolation to maximum field strength at full load.


LTE mode (option)

for measuring the cell-specific signals of LTE cells in FDD networks and extrapolation to maximum field strength at full load.


Request A Quote

Rent      Buy      Repair


I thought of no place else to try first but you.

-- Tony
Fremont, CA

Why Choose Axiom?

Your testing is complicated enough, we want to make sourcing test equipment the easy part.

Dedicated Customer Service
We go beyond the role of order taker & strive to partner with you to provide a custom solution.
Competitive Prices
Equipment is agressively priced. We work with you to find a solution to fit your budget.

Fast Turnaround
No long drawn-out sales process, We help you find the equipment you need, and get through order processing quickly so your equipment ships out fast!

Warranty & Support
Comprehensive Parts and Labor warranty on all equipment sold. Includes a user manual, is fully accessorized, and tested to manufacturer specifications prior to shipment.


I feel like I am getting the best service and the best pricing – the best of both worlds from Axiom.

Jon P.
San Diego, CA

Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    

YouTube Facebook
Subscribe to receive our weekly news & promotions

FAQ      Privacy      Terms      Site Map      Site Map XML     

© 2022 Axiom Test, All Rights Reserved   

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
(760) 806-6600
© 2022 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML