Tektronix SA2600
Spectrum Analyzer, 10 kHz - 6.2 GHz

Download Product Datasheet

Product Overview

RENT TEKTRONIX SA2600 Spectrum Analyzer (call for availability)

With field-ready, rugged hardware featuring outstanding displayed average noise level, spurious free dynamic range, phase noise, and easy LAN networking capability in a handheld unit, the Tektronix SA2600 Analyzer allows you to scan, classify, and locate signals in the field environment.

Features and Specifications of the Tektronix SA2600 Spectrum Analyzer include:

Scan:

• Benchtop spectrum analyzer performance in a ruggedized handheld battery-operated field unit offers better than 70 dB spurious free dynamic range (SFDR), guaranteed = -95 dBc/Hz at 10 kHz offset phase noise specifications from 10 kHz to 6.2 GHz
• Excellent sensitivity for detecting very low-level signals with -153 dBm DANL at 10 Hz RBW (equivalent to -163 dBm/Hz) such as RF bugs and unauthorized transmitters
• Spectrum Correlation Function (SCF) finds "embedded" signals or interferers that hide under other wideband signals
• LAN interface for remote control and unattended monitoring stations for spectrum awareness

Locate:

• Rapid targeting of signals with field-proven signal hunting, mapping, and documentation tools
• Hunt outdoor signals with built-in GPS receiver by plotting measurements directly into GPS geo-referenced maps such as Pitney Bowes Mapinfo, Google™ Earth, Microsoft® MapPoint®, Bitmap, and many others
• Improved spectrum awareness with high-accuracy measurement synchronization and time stamping
• Hunt in-building signals with a single-touch Tap-and-Walk-and-Tap interface
• Backlit display, viewable in direct sunlight, and extended battery performance with hot-swappable dual batteries
• Rugged design per MIL-PRF-28800F

Features:

• Option EP1 enhances the Tektronix SA2600 Analyzer DPX™ Live RF spectrum display to 10,000 spectrums/sec and 125 µs minimum signal duration for 100% Probability of Intercept (POI)
• Option SC1 enhances the Tektronix SA2600 Analyzer by adding signal classification capability
• Operating Frequency Range: 10 kHz - 6.2 GHz
• Phase noise level: -95dBc/Hz @ 10kHz offsets
• DANL: -145dBm in 10Hz RBW with preamp typical
• Resolution bandwidth (RBW): range of 10Hz to 3MHz (Manual)
• Third Order Intercept: = +7 dBm, 0 dB Input Attenuation, Preamp Off
• Maximum Operating Input Level: +20dBm peak envelope power
• IF Output Impedance: 50 ohm
• IF Center Frequency: 140 MHz
• built-in GPS receiver
• Battery Life 5 hours of continuous Spectrum Mode