Agilent 33502A, Keysight 33502A, HP 33502A
Isolated Amplifier - 2 Channel, 50 Vpp

Download Product Datasheet

Available Option Configurations

Config-01

• 001 - Rear output channels
• 1CN - Lock Link Kit
• STD - Front output channels
• 1CM - Rackmount Kit
• PLG - Continental European power cord - ONLY FOR EU DISTR W MULT PWR CORD STANDARDS
• MSRP: $4,453
• Available for Rental    GET QUOTE  

Product Overview

The Keysight 33502A (Agilent) is a dual-channel, high voltage output amplifier. It has an isolated analog front end with up to 50 Vpp (±25 V) output voltage range. It is also a very low-distortion amplifier with < 0.01% @ 10 kHz and 40 Vpp. The Keysight 33502A (Agilent) is designed to work as a companion for function generators to offer low-distortion, higher voltage outputs.

Features and Specifications of the Keysight 33502A (Agilent) Amplifier include:

General Characteristics:

• Number of  channels: 2
• Channel to channel ground connection: Not connected in BYPASS ON. Connected with both channels OFF or in Gain of 5x
• Floating Voltage: ±42 Vpk to earth
• Full-power BW: 100 kHz @ 50 Vpp
• Small-signal BW: > 300 kHz
• Slew Rate: 20 V/ms min.
• THD+N: < 0.01% @ 10 kHz, 40 Vpp
• Output drive: 200 mA max.

Input Configuration & Specification:

• Input Coupling:
• AC Coupling: Programmable
• DC Coupling: Default, Programmable
• Input Impedance: 
• 1MO: Default, Programmable
• 50O: Programmable
• Input Voltage Range:
• Maximum Voltage Range: ±5 Vpk for gain of 5x, ±30 Vpk for bypass
• Damage Level:±10 Vpk for 50 O input, ±35 Vpk for 1 MO input
• Input Path: Programmable gain of 5x, bypass (1x), or off state
• Input Gain 5X: 5X, Fixed, Non-Inver
• Gain Accuracy (Measured with >=1 Mohm load and 1 Mohm input selection.): ±0.1% @ 1KHz
• Flatness DC coupling (For all loads >250 ohms and
• 0.1% : dc - 10KHz
• 1% : dc - 40KHz
• 5% : dc - 100KHz
• Flatness AC coupling (For all loads >250 ohms and
• 0.1% : 30Hz - 10KHz
• 1% : 10Hz - 40KHz
• 5% : 3Hz - 100KH
• Small Signal Bandwidth (For all loads >250 ohms and > 300 KHz (-3db)
• Full Power Bandwidth (For all loads >250 ohms and 100KHz @ 50Vpp output
• Input Bypass:
• Bandwidth for 50O system: > 300 MHz (-3db
• Maximum Current: 0.2 Apk
• Noise:
• Input referred noise: < 40nV/ rt-Hz @ 1kHz

Output Configuration and Specification:

• Output Current: 200mA (150mA for continuous output from -8V to +8V)
• DC Output Resistance:< 2O
• Max Output Level (For all loads >250 ohms and ±25Vpk
• Output DC Offset: <10mV
• Output Slew Rate (For all loads >250 ohms and > 20V/us
• THD + N (For all loads >250 ohms and < 0.01% @ 10kHz, 40 Vpp
• Aberrations (For all loads >250 ohms and <5% for waveforms with
• Transition time (Final value ±1% of step size) (For all loads >250 ohms and 2.5uSec+ 50nSec/volt of output step
• Channel to channel isolation for gains of 5x: > 75dB
• Capacitive Load for no oscillation: < 1 nF
• Output Protection:
• • Continuous short circuit protection
  • Thermal overload shutdown
  • Over temperature status flag

General Characteristics:

• Power Supply: 00V/120V/ 220V / 240V ± 10%
• Power Line Frequency: 50–60 Hz ± 10%, 400 Hz ± 10%
• Power Consumption: 100 VA peak (typical value depends on configuration and load)