Agilent 6015A, Keysight 6015A, HP 6015A
Power Supply, 500V, 5A, 1050W

Download Product Datasheet

Product Overview

The HP Agilent 6015A Power Supply takes the place of multiple power supplies on your test bench by providing maximum power at a variety of operating points. The HP 6015A has ten-turn front panel pots to allow precise local control. This power supply also may be connected in auto-parallel or series with their corresponding GPIB unit (6030 Series), as part of a test system.

Specifications of the Agilent 6015A Power Supply include:

• 500V, 5A, 1050W
• Autoranging output:
• V1, I1: 500 V, 2 A
• V2, I2: 350 V, 3 A
• V3, I3: 200 V, 5 A
• Ripple and noise, 20 Hz to 20 MHz
• Voltage rms: 50 mV
• p-p: 160 mV
• Current rms: 50 mA
• Load regulation
• Voltage 0.01%+: 13 mV
• Current 0.01%+: 35 mA
• Transient response time: 10% step change
• Time: 5 ms
• Level: 200 mV
• Programming resolution
• Voltage: 125 mV
• Current: 1.25 mA
• DC floating voltage (either terminal can be grounded or floated from chassis ground): ±550 V
• AC input current
• 100 VAC: 24 A
• 120 VAC: 24 A
• 220 VAC: 15 A
• 240 VAC: 14 A
• Remote Sensing: Up to 2 V drop in each lead. Voltage regulation specification met with up to 0.5 V drop, but degrades for greater drops.
• Modulation: (analog programming of output voltage and current)
• Input signal: 0 to 5 V or 0 to 4 k Ohms

Click to see all the models in this series