RENT ELGAR CW801P AC Power Source (Call for Availability)
The 800VA Elgar CW801P AC power sources are 2U high and allow the unit under test to be connected to the front or rear panel. Fully rated current is delivered for either output voltage range of 135 VAC or 270 VAC over a standard frequency range of 45 to 500 Hz. The Elgar CW801P AC source can be paralleled to provide extra power. Digital Signal Processing (DSP) based measurements include voltage, current (amperes, peak amperes, crest factor), power (watts, VA and power factor) and frequency.
The Elgar CW801P AC power sources provides clean single phase power with standard IEEE-488.2 and RS-232 control. The front panels have two bright four digit, seven segment displays. Power Factor Corrected (PFC) universal input voltage allows maximum power to be delivered from an AC outlet without the user selecting the range. The Elgar CW801P is also protected against over temperature conditions. A two-speed fan results in quieter operation at lower power levels. Current shutdown or foldback modes can be selected from a rear panel switch.
Specifications of the ELGAR CW801P AC Power Source includes:
AC Power | 800VA |
Voltage Low/High | 0-135V/0-270V |
Frequency | 45-500Hz |
Peak Current Range | 0-25A |
Power Factor | >0.99 Typical |
See Datasheet for Full Specifications
Testimonials |
I have used Axiom Test Equipment for a number of years now and have found them to be reliable and well priced. Axiom stands behind their equipment and I always have confidence that I will get what I paid for. -- Don Milpitas, CA |