RENT ROHDE & SCHWARZ NRT2 Power Reflection Meter (Call for Availability)
The compact Rohde & Schwarz NRT2 Power Reflection Meter with a state-of-the-art 5" touchscreen is extremely easy to operate. On the top menu level, users can switch between the most important measurements. Additional parameters can be set in clearly structured submenus. The forward measurement function shows the average power, average burst power, peak envelope power (PEP) and the peak-to-average power ratio (crest factor). The calculated absorption average power (forward minus reverse), absorption burst power, absorption PEP and amplitude distribution (CCDF) for modulated signals can also be displayed.
The remote commands of the Rohde & Schwarz NRT2 are 100 % code compatible with the command set of the previous NRT model. The NRT2 power reflection meter can be remote controlled via USB or LAN. Remote control via GPIB (IEEE 488) is available as an option. Directional power sensors measure forward and reverse power under operating conditions. These measurements are required when installing, servicing and monitoring transmitters, antennas and RF generators.
Specifications for the ROHDE & SCHWARZ NRT2 Power Reflection Meter Include:
Frequency Range | 25 MHz to 4 GHz (sensor-dependent) |
Power measurement range | 0.0007 W to 120 W (average), max. 300 W (peak) (sensor-dependent) |
accuracy of no-load output voltage | ±(0.4% of output voltage + 4 mV) |
resolution | 16 bit |
See Datasheet for full specifications
Testimonials |
I really appreciate the quick turnaround, we queried early afternoon and are able to have the rental test equipment here within 20 hrs. Thank you for making that happen. -- Kabul S. Chandler, AZ |