Teledyne LeCroy D600
Differential Probe, 7.5 GHz

Download Product Datasheet

Product Overview

LECROY D600

The LeCroy D600 WaveLink probe (w/ D600-AT Twin Tip Module) has the following features:

• Built-in thumbwheel for precise positioning of tip — stays put after adjustment
• Maintains sharp points for good contact
• Tips made of “NiTiNOL,” a super-elastic nickel-titanium alloy 
• Flexes as you apply pressure
• Consistently returns to original form

The LeCroy D600 Probe uses transmission line topology in the input section combined with active differential probe technology and maintains good loading characterisitcs across the frequency span

The D600 WaveLink probes virtually eliminate distortion when measuring signals. This benefit is particularly useful in eye pattern measurements, now routine for systems using fast serial parallel data bus architecture. All LeCroy D600 WaveLink probes offer:

• Superior loading characteristics
• Precise frequency response with outstanding fidelity for high-speed signals
• Both low loading and frequency response flatness are needed to ensure the signal fidelity required to measure performance accurately.

Spefications of the LeCroy D600 (w/ D600-AT) include:

• Rise Time: < 70 ps
• LF Attenuation Accuracy: 2% 0 ±1.2 V (with 0 V common mode)
• Zero Offset Error (Within 15 minutes after Autozero): < 10 mV RTI
• Offset Gain Accuracy:  1% of offset vaule
• Bandwidth: DC to 7.5 GHz
• Input Differential Range: 4.8 Vp-p
• Common Mode Range (Max. peak voltage either input to ground): ±2.4 V
• DC Input Resistance: 4 kΩ differentia
• CMRR
• DC to 1 GHz > 40 dB
• 1 GHz to 3 GHz > 30 dB
• 3 GHz to 7 GHz > 20 dB
• Noise:  5.8 mVrms with 6 GHz oscilloscope