Easy-Laser XT440
Laser Shaft Alignment System

Download Product Datasheet

Product Overview

RENT EASY-LASER XT440

The Easy-Laser XT440 (by Damalini) Laser Shaft Alignment System sets a new standard in laser systems for shaft alignment. The system includes wireless measuring units, a large 8" color display, and an IP66/67 rated design that can withstands harsh environments, accomodate inputs touch-screen inputs, even when the user is wearing rubber gloves, and integrates a 13MP camera. An optional IR camer for thermal imaging is also available as an option. In addition, the XT440 gives you the freedom to move between hardware platforms. You can display alignment data on multiple devices, including the XT11 computer, Apple® IOS™ and Android tablets and phones.

With the Easy-Laser XT440, you can measure:

EASYTURN™ FUNCTION

The EasyTurn™ function allows you to begin the measurement process from anywhere on the turn. You can turn the shaft to any three positions with as little as 20° between each position to register the measurement values. Voila! Measurement is complete!

SOFT FOOT CHECK

Alignment work begins with a soft foot check. The soft foot check ensures that the machine is resting evenly on all its feet by indicating which foot/feet should be adjusted. This is an important part of securing a reliable alignment. After the soft foot check is com- plete, you can go directly to the alignment program with all of the machine’s distance values saved.

MULTIPLE SETS OF FEET

The software can adjust to machine designs of all types such as those with two pairs of feet, three pairs of feet, and feet in front of the coupling, etc.

SWAP VIEW FUNCTION

The swap view function allows you to adjust the position of the motor on screen to correspond with the position of the machine in front of you, making it easier to understand adjustment directions.

THERMAL GROWTH COMPENSATION

Oftentimes, machines expand considerably when moving from a cold to hot operating temperature. The Thermal Growth Compensation function allows the measurement system to calculate the appropriate shims and values needed to make adjustments in such cases. Compensation values for the machines are normally supplied by the manufacturers.

MEASUREMENT VALUE FILTER

An advanced electronic filter function can be used to achieve reliable results even under poor measuring conditions. Air turbulence and vibrations from adjacent machines are no match for the Easy-Laser® filter function!

HORIZONTAL MACHINES

The user interface is intuitive and guide you through the measurement process. It is animated and zooms into the most important things for each step. You can save the measurements of a machine for As found and As left in the same file.

VERTICAL/FLANGE-MOUNTED MACHINES

Align vertical and flange-mounted machines,  e.g. pumps, motors, gear boxes. Shows center offset, angular error and shim value at each bolt. (Available during 2017)

VALUES – DIGITAL DIAL INDICATOR

The Values program has a clear digital representation of the laser target, and a list view for recorded values. Use it to measure as with dial gauges and to check bearing play.

TOLERANCE CHECK

Measurement results can be checked against pre-defined tolerance tables or values you determine yourself. This allows you to immediately see if the alignment is within the approved parameters, thereby considerably reducing the amount of time spent on alignment.

BUILT-IN MANUAL

The app includes a searchable Users Manual which opens the right chapter depending where in the process you are. This makes it quick and easy to find the answer to your user questions.

Key features and specifications of the Easy-Laser XT440 Measuring Unit includes:

• Wireless communication: Bluetooth® wireless technology
• Type of detector: TruePSD 30 mm [1.2”]
• Resolution: 0.01 mm [0.5 mils]
• Measuring errors: <1%
• Measurement range: Up to10 m [33 feet]
• Type of laser: Diode laser
• Laser wavelength: 630–680 nm
• Laser class: Safety class 2
• Laser output: 
• Electronic inclinometer: 0.1° resolution
• Environmental protection: IP class 66 and 67
• Operating temperature: -10–50 °C
• Storage temperature: -20–50 °C
• Relative humidity: 10–95%
• OLED display: 128x64 pixels
• Housing material: Anodized aluminium + PC/ABS + TPE
• Dimensions: WxHxD: 76x76.7x39.3 mm [3.0x3.0x1.5”]
• Weight: 245 g [8.6 oz]
• Operating time: >24 h continuously

Key features and specifications of the XT11 Optional XT11 Display Unit includes:

• Type of display/sizeVGA: 8” colour screen, backlit LED, multitouch
• Internal battery (fixed): Heavy duty Li Ion chargeable
• Connections: USB A, USB B, Charger, AV (optional)
• Operating temperature:-10–50 °C
• Storage temperature:-20–50 °C
• Wireless communication: Wireless technology, WiFi
• Relative humidity: 10–95%
• OLED display: 96x96 pixels
• Camera, with diode lamp: 13 Mp
• IR camera (optional): FLIR LEPTON® Long Wave Infrared
• Help functions: Built-in manual
• Environmental protection: IP class 66 and 67
• Housing material: PC/ABS + TPE
• Dimensions: WxHxD: 274x190x44 mm [10.8x7.5x1.7”]
• Weight (without batteries): 1450 g [51.1 oz]
• Operating time: Up to 16 h continuously