AGILENT N4692A
The Agilent N4692A MW electronic calibration (ECal) module makes calibration of vector network analyzers fast, easy and accurate. The RF ECal system is easily controlled by one of two methods depending on the network analyzer. The Agilent PNA and ENA series of network analyzers controls the module directly via the USB interface. The modules can also be controlled via an 85097B interface kit when used with an Agilent 8753E/ES/ET or 8720D/ES/ET (requires a special parallel cable and firmware Rev. 7.74).
ECal is an ideal solution for calibrating network analyzers. Performing a full two-port calibration takes less than half the time and number of connections using ECal versus mechanical cal kits. Furthermore, the accuracy of the calibration is comparable between electronic and mechanical methods. Traditional mechanical calibrations require intensive operator interaction which is prone to errors. With ECal, the operator simply connects the ECal module to the network analyzer and the software controls the rest.
Specifications of the Agilent N4692A ECal module include:
Click to see all the models of Keysight / Agilent Electronic Calibration Modules
Testimonials |
I really appreciate the quick turnaround, we queried early afternoon and are able to have the rental test equipment here within 20 hrs. Thank you for making that happen. -- Kabul S. Chandler, AZ |
Customers who viewed this also viewed | |||
Anritsu 36585K Precision AutoCal, K, for 70 kHz to 40 GHz Calibrations
|
Keysight / Agilent 85056K Mechanical Calibration Kit, 50 GHz, 2.4mm & 2.92mm
|