RENT STANFORD RESEARCH FS725 Rubidium Frequency Standard (Call for Availability)
The Stanford Research FS725 integrates a rubidium oscillator, a low-noise AC power supply, and distribution amplifiers in a compact, half-width 2U chassis. It provides stable and reliable performance with an estimated 20 year aging of less than 5 × 10–9, and a demonstrated rubidium oscillator MTBF of over 200,000 hours. The FS725 is an ideal instrument for calibration and R&D laboratories, or any application requiring a precision frequency standard. There are two 10 MHz and one 5 MHz outputs with exceptionally low phase noise (–130 dBc/Hz at 10 Hz offset) and one second Allan variance.
Up to three internal distribution modules can be added to the Stanford Research FS725. Each module has four 10 MHz outputs, one 5 MHz output, and one 1 pps output, all with the same low phase noise, harmonic distortion and jitter. An RS-232 interface allows direct communication with the rubidium oscillator. Using the provided Windows software, you can easily monitor and control 1 pps timing, and determine the instrument’s operational status. There are two alarm relays that indicate the status of the rubidium oscillator lock state and synchronization to an external 1 pps input. The relays are SPDT, providing both normally-open and normally-closed contacts.
Specifications for the STANFORD RESEARCH FS725 Rubidium Frequency Standard Include:
Output frequencies | 10MHz sine, 5MHz sine, 10µs wide 1 pps pulse |
Amplitude | 0.5Vrms, ±10% |
Harmonics | <–60 dBc |
1 pps pulse amplitude | 2.5V into 50Ω, 5V into High-Z loads |
See Datasheet for full specifications
Testimonials |
I just wanted to say thank you. You guys are constantly dealing with our outrageous (and sometimes off the wall) demands and requests with the upmost care and professionalism. You guys are quick and give a level of quality that you dont often see, it is refreshing and a wonderful feeling to know that you guys have our backs. -- Tony B. Carlsbad, CA |