Tektronix Encore

Quadtech / IET GUARDIAN 5000
AC/DC/IR/GC Electrical Safety Analyzer

Electrical Test and Power Analyzers >> Hipot Testers >> AC/DC/IR/GC Electrical Safety Analyzer
Rent Used Test Equipment
Manufacturer: Quadtech / IET
Model: GUARDIAN 5000

Quadtech / IET GUARDIAN 5000 AC/DC/IR/GC Electrical Safety Analyzer

Electronic Test and Measurement Equipment

Quadtech / IET GUARDIAN 5000 AC/DC/IR/GC Electrical Safety Analyzer Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

The Quadtech Guardian 5000 Electrical Safety Analyzer is four instruments in one, providing AC Hipot, DC Hipot, Insulation Resistance, and Ground Bond measurements from a single test connector in one versatile instrument. This provides a cost effective solution to electrical safety compliance testing with maximum flexibility for present and future requirements. Performing all of the electrical safety tests in one box can reduce test time, increase productivity and reduce the number of boxes requiring calibration.

The Guardian 5000 AC Hipot Testerperforms AC dielectric testing (hipot) over the voltage range from 100V to 5000VAC RMS. The maximum leakage current of 40mA RMS makes the Guardian 5000 ideal for testing devices with high leakage currents such as power supplies which have large filter or “Y” capacitors for noise reduction. Both the actual test voltage and total current are displayed during testing.

The Guardian 5000 DC Hipot Testervoltage range for DC dielectric testing is 100V to 6000VDC with a resolution of 10V. The maximum current leakage is 20mA which allows quick charging of capacitive devices. A quick discharge of the device when the measurement is complete, also minimizes test times.

The Guardian 5000 Insulation Resistance measurements are similar to a DC hipot but rather than displaying leakage current, resistance is calculated and displayed. The insulation resistance can be measured over the range of 10MW to 10GW with test voltages from 50VDC to 1000VDC in 1V steps.

The Guardian 5000 Ground Bondprovides up to 30A AC for ground bond testing. The test current can be programmed from 1A to 30A in 0.1A steps. Hi current limit, test time, frequency and open circuit no load voltage can all be programmed. The offset feature can automatically compensate for any lead resistance.

Features of the Quadtech Guardian 5000 include:

  • Programmable output voltage to 5KV AC and 6KV DC
  • Ground Bond Testing to 30A AC with Adjustable Limit
  • Multi-point Scanner Option for High Voltage Switching of up to 64 Points
  • Programmable Ramp and Test Times
  • Storage of 50 Tests Setups with 15 Steps per Setup
  • Trip Current Programmable to 40mA AC and 20mA DC
  • Front Panel Lockout via Password
  • Standard IEEE and Remote Control Interfaces
  • Optional RS232 Interface
  • LabVIEW®Intrument Driver Software
  • Insulation Resistance Measurements from 10MW to 10GW 1ohm Limit

Applications for the Quadtech Guardian include:

  • Production and Compliance Testing of Appliances, Instruments and Information Technology Equipment in Accordance with UL, CSA, IEC, TUV and Other Standards such as EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111 and UL1950 
  • Transformer Electrical Safety Testing
  • Electric Motor Safety Testing
  • Power Supply Safety Testing
  • Verification of the Ground Connection on Products with a Three Prong Power Cord

RENT Guardian 5000 (Call for Availability)

Request A Quote

Rent      Buy      Repair


Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    

YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE

© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600