Tektronix Encore




Yokogawa 701260
Input Module, High-voltage, 100 KS/s, 16-bit isolation with RMS (2 channels)

Data Acquisition and Recorders >> Accessories and Other >> Input Module, High-voltage, 100 KS/s, 16-bit isolation with RMS (2 channels)
Rent Used Test Equipment
Manufacturer: Yokogawa
Model: 701260

Yokogawa 701260 Input Module, High-voltage, 100 KS/s, 16-bit isolation with RMS (2 channels)

Electronic Test and Measurement Equipment

Yokogawa 701260 Input Module, High-voltage, 100 KS/s, 16-bit isolation with RMS (2 channels) Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

YOKOGAWA 701260

The Yokogawa 701260 Input Module, offers high speed and 12-bit isolation. Specifications of the Yokogawa 701260 module include:

  • Input channels 2
  • Input couplings AC, DC, GND, AC-RMS, DC-RMS
  • Maximum sampling rate 100 kS/s
  • A/D conversion resolution 16 bits (2400 LSB/div)
  • Input type Isolated unbalanced
  • Frequency range(–3 dB)
    • Waveform measurement mode
      • DC, up to 40 kHz
    • RMS measurement mode
      • DC, 40 Hz to 10 kHz
  • Input range
    • (10:1) 200 mV/div to 2000 V/div (in steps of 1, 2, or 5)
    • (1:1) 20 mV/div to 200 V/div (in steps of 1, 2, or 5)
  • Effective measurement range 20 div (display range 10 div)
  • DC offset ±5 div
  • Maximum input voltage (1 kHz or less)
    • In combination with 700929(10:1)
      • 1000 V (DC + ACpeak)
    • In combination with 701901+701954 (1:1)
      • H side: 700 Vrms (CAT II) 7 , L side: 400 Vrms (CAT II)
  • Maximum allowable in-phase voltage
    • In combination with 700929 (10:1)
      • H side: 1000 Vrms (CAT II) 4 , L side: 400 Vrms (CAT II)
    • Direct input (when using a cable which doesn’t comply with the safety standard)
      • H/L sides: 30 Vrms (42 V DC + ACpeak)
    • DC accuracy (waveform measurement mode)
      • ±(0.25% of 10 div)
    • DC accuracy (RMS measurement mode)
      • ±(1.0% of 10 div)
    • AC accuracy (RMS measurement mode)
      • Sine wave input ±(1.5% of 10 div)
    • Crest factor of 2 or less ±(2.0% of 10 div)
    • Crest factor of 3 or less ±(3.0% of 10 div)
  • Input impedance 1 M? ± 1%, approx. 35 pF
  • Connector type Isolation type BNC connector
  • Input filter  OFF, 100 Hz, 1 kHz, 10 kHz
  • Temperature coefficient
    • Zero point ±(0.02% of 10 div)/°C (typical value)
    • Gain ±(0.02% of 10 div)/°C (typical value)

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    



YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600