ETS Lindgren 3117
Double-Ridged Guide Antenna, 1 - 18 GHz, 300W

Download Product Datasheet

Product Overview

RENT ETS-Lindgren 3117 (call for availability)

The ETS-Lindgren 3117 Double Ridged Waveguide is a the latest addition to a family of double ridge waveguides for microwave and EMC measurement from ETS-Lindgren. The improved performance of the 3117 corrects the lower gain at the upper end of the frequency range, commonly found in ridged waveguide antennas. Users of this antenna benefit from uniform illumination of target surfaces and accurate gain measurement. In addition, the ETS-Lindgren 3117 Antenna exhibits high gain and low VSWR across its operational frequency band, accepting moderate power input of 300 watts.

The electrical characteristics of this antenna were designed and modeled using powerful workstations running electromagnetic simulation software. Equally important, experienced RF engineers worked with our manufacturing team to produce a practical and affordable realization of the modeling process.

Single Lobe Radiation Pattern: The 3117 maintains a single main lobe pattern in the direction of the horn axis over its frequency range. This characteristic is essential for even distribution of electromagnetic energy on a target surface, and accurate measurement of gain and vector information. The Model 3117’s unique design suppresses the propagation of high order modes. The result is an antenna with a well-defined single lobe radiation pattern that outperforms other antennas in its class.

The 3117 sweeps from 1 GHz to 18 GHz without stopping for band breaks, making it ideal for automated testing. It has the widest usable frequency range of any antenna in its class, with no performance degradation from high order modes.

The Model 3117 uses a Type N connector and accepts up to 300 watts of continuing input power with up to 400 watts of peak power. The antenna’s high gain and low VSWR over its operating frequency translates into efficient amplifier use and high field strengths.

The Model 3117 has a more uniform gain and antenna factor because of the better behavior of its radiation pattern. Since the pattern is stable over frequency, the gain and the AF also remain stable. Similar antennas of this class exhibit large variations of the gain and the AF as the frequency increases.

The 3117 Antenna has the following specifications:

• Frequency Minimum: 1 GHz 
• Frequency Maximum: 18 GHz 
• Connectors:Type N 
• Impedance (Nominal): 50 ? 
• Maximum Continuous Power: 300W 
• Pattern Type: directional 
• Peak Power: 400W 
• Polarization: linear 
• VSWR: 3.5:1 max