RENT NH Research CAL300 Calibrator (Call for Availability)
The NH Research CAL300 Calibrator is designed to be used with a user-provides 81/2 Digit DMM Plus Supplemental DC Sources or Power Resistor Box depending on the specific product family to be calibrated. Given the wide assortment of NHR products that the CAL300 covers, some additional instruments are necessary for specific product families. NH Research CAL300 Calibrator can be controlled from PC through LAN with SCPI & VXl-11 communications.
NH Research CAL300 Calibrator is fast and ease of use. A graphical, interactive application makes calibration a straightforward process capable of being performed by a technician or engineer without calibration expertise in 2 to 3 hours. At the conclusion of the calibration the user then saves the calibration data to a flash drive or a file. To calibrate the 4700, 4760 and 4300 DC Loads, high & low-voltage DC sources are required. To calibrate the 9200/9300 Battery Test Systems, a NHR Resistive Load Box is required.
Specifications for the NH Research CAL300 Calibrator Include:
AC Current | 10, 30, 300 A |
DC Current | 12, 30, 400 A |
Low-Power Resistance | 300, 3.3 k, 33k |
Low-Voltage Resistance | ±2.7 V |
See Datasheet for full specifications
Testimonials |
Wow, you are good! Thanks for all the information and thank you for your help! Much appreciated! -- Carolyn Maryland |