RENT FLUKE 5730A Multi-Function Calibrator (Call for Availability)
The Fluke 5730A calibrates a wide range of digital multimeters, up to long-scale 8.5 digit DMMs, as well as RF voltmeters when equipped with the wideband option. A new graphical user interface features easy-to-read, easy-to-use menus, as well as access to common functions with just the touch of a finger. Status indicators for OPERATE, STANDBY, and HAZARDOUS VOLTAGE appear on the screen in bright letters or icons that you can easily recognize from across the calibration lab. USB ports are placed both on the front and rear of the unit. Use the port at the front to download internal calibration constants; use the rear port for remote communication with a PC—or choose the LAN, IEEE or serial interfaces.
The Fluke 5730A calibrator features Artifact Calibration. Only three artifact standards—a 10 V dc reference and 1 ohm and 10 k ohm resistance references—are required to calibrate all ranges and functions to full specifications. For extra confidence that the 5730A calibrator stays within its specifications between calibrations, the built-in automated Cal Check function checks every range and function against a set of dedicated internal standards to monitor the drift of each. Paired with a Fluke Calibration 52120A Transconductance Amplifier, the 5730A can output up to 120 A and display the output on the 5730A touch screen display. Operating in closed-loop mode with the 52120A, the 5730A maintains the best current accuracy over the widest range of calibration workload. The new 5730A is also compatible with the Fluke Calibration 5725A Boost Amplifier.
Specifications for the FLUKE 5730A Multi-Function Calibrator Include:
Voltage DC | 0 to ±1100 V |
Voltage AC | 22 µV to 1100V 10 Hz to 1 MHz |
Current DC | 0 to ±2.2A |
Current AC | 9 µA to 2.2A, 10 Hz to 10 kHz |
See Datasheet for full specifications
Request A Quote | |||
Testimonials |
Axiom has been a huge help to our success in the high demand of Silicon Valley. We are pleased to continue to work with Axiom for our equipment needs. -- Tony W. Newark, CA |