Rent or Buy Milmega AS0825-65 Broadband Amplifier, 0.8 GHz - 2.5 GHz, 65W


Tektronix Encore




Milmega AS0825-65
Broadband Amplifier, 0.8 GHz - 2.5 GHz, 65W

Amplifiers - RF and Microwave >> Above 1 GHz and 100W or Less >> Broadband Amplifier, 0.8 GHz - 2.5 GHz, 65W
Rent Used Test Equipment
Manufacturer: Milmega
Model: AS0825-65

Milmega AS0825-65 Broadband Amplifier, 0.8 GHz - 2.5 GHz, 65W

Electronic Test and Measurement Equipment

Milmega AS0825-65 Broadband Amplifier, 0.8 GHz - 2.5 GHz, 65W Product Datasheet Download Product Datasheet

Rent Test Equipment

Available Option Configurations

Config-02

  • 220 - 220VAC Input Only
  • MSRP: $23,600 | In Stock!    GET QUOTE  

Product Overview

RENT MILMEGA AS0825-65 AMPLIFIER (Call for Availability)

The Milmega AS0825-65 Broadband Amplifier implements the lastest technologies with its innovative design. Its unique features and benefits include an impressive array of input/output and sample port options, cost effective power or bandwidth upgrades, unbeatable power density, built in-in protection and much more.

Features and Specifications of the MILMEGA AS0825-65 Amplifier include:

  • Features:
    • Maximum power
      • Unbeatable power density
      • Will maintain full forward power into any load condition
      • Combiner / coupler integration as standard allows samples of incident and reflected power to be measured with virtually no loss
      • 100% tested into short and open circuit
      • Up to 250 watts in a single 3U unit
      • Consistent over greater than octave bandwidths
      • Broadband CW power output to 1 kW
    • High visibility status and power indicators:  Color LED bar graph displays on the front panel giving an indication of incident and reflected power
    • 15 way rear mounted D-type allowing remote operation via TTL commands while providing access to an output signal sample
    • All data is measured at 25 °C driven from a 50 W source and driving into a 50 W load
    • Built-in protection:
      • In the event of internal temperature exceeding 70 °C, the amplifier blocks will automatically switch off to avoid damage
      • Unit incorporates a rear panel mounted connector for interlock BR2-female
    • Easily rack mounted: Amplifiers are standard 3U high units and may be combined in rack mounted form to build higher power amplifiers
    • Bench models:  3U high units have bench case options
  • Specifications:
    • Class leading linearity and noise specifications:
      • Gain variation with temperature
      • IP3 typically 10 dB> P1 dB
      • Harmonics -20 dBc minimum
      • Spurious (maximum) -70dBc
      • Spurious (typical) -80 dBc
    • Psat (minimum):  
      • 64.6 W
      • 48.1 dBm
    • P1dB (minimum):
      • 57.5 W
      • 47.6 dBm
    • Noise figure (maximum):  6.0 dB
    • Gain variation:  ± 2.0 dB
    • Harmonic distortion (maximum):  -20 dBc
    • Power consumption:  1000 W
    • Primary power:  
      • 85-260 V (50/60 Hz)
    • Input power (for rated output):  5 dBm
    • Input power (no damage):  15 dBm 
    • Input VSWR (impedance 50 Ω nominal):  2:1 maximum
    • Output VSWR (impedance 50 Ω nominal):  2:1 typical
    • Load VSWR (any phase) is infinite
    • Line input frequency:  47-65 Hz
    • RF Input:  Type N female
    • RF Output:  Type N female

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    


Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600