RENT AE TECHRON 7228 RF Amplifier (Call for Availability)
AE Techron’s 7228 amplifier is a 1-kVA, DC-enabled unit that provides advanced protection and exceptional versatility. It features a DC to 1 MHz bandwidth and improved performance at frequencies above 100 kHz. In continuous operation, a 7228 can provide up to four times the output power of the 7224 at frequencies above 100 kHz. If more current or power is needed, amplifiers can be combined in series or parallel and operate as a single system.
Back-panel switches allow the AE Techron 7228 be configured by the user for high-voltage/low-current, medium voltage and current, or low-voltage/high-current applications. Residual noise, slew rate, and gain linearity have all been improved over the 7224 model. It can safely drive a wide range of resistive, inductive loads. The 7228 is typically used to create waveforms as required by a variety of EMC standards for DC powered electronics like FMC 1278, DO-160, and MIL STD 461. It can also be used as a gradient amplifier for very small bore, high-gain MRI and NMR systems.
Specifications for the AE TECHRON 7228 RF Amplifier Include:
|Frequency||DC - 1 MHz|
|Rated Output Power||1000W|
|Slew Rate||100 V/µs|
|Output Impedance||5.3 mΩ in series with 0.95 µH|
See Datasheet for full specifications
Check out the new AE Techron 7234 Audio Amplifier & Battery Simulator. It offers more than twice the amount of continuous DC Power at 28A and has a faster slew rate of 100+ V/μs.
Request A Quote
Customers who viewed this also viewed
AE TECHRON 7224 Linear Power Amplifier, DC-Enabled, DC - 300 kHz, 900W RMS, 900 VA, DC
Ophir 5127 RF Amplifier, 20 MHz - 1 GHz, 200W
Amplifier Research 175A400 RF Amplifier, 10k Hz - 400 MHz, 175W
AE TECHRON 7234 Audio Amplifier & Battery Simulator