RENT Amplifier Research 25A250A RF Amplifier (Call for Availability)
The Amplifier Research 25A250A amplifier is a self-contained, broadband unit designed for laboratory applications where instantaneous bandwidth, high gain and moderate power output are required. Utilization of push-pull MOSFET circuitry lowers distortion, improves stability and allows operation into any load impedance without damage. The Amplifier Research 25A250A, when used with an RF sweep generator, will provide a minimum of 25 watts of swept power.
Housed in a stylish contemporary enclosure, the Amplifier Research 25A250A provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, and use as a driver for higher power amplifiers. The 25A250A utilizes a switching power supply with universal and autoranging input which will automatically accept from 90 to 135 VAC or from 180 to 270 VAC at 47 to 63 Hz.
Specifications of the Amplifier Research 25A250A RF Amplifier Include:
Frequency | 10kHz - 250MHz |
Rated Output Power | 25W |
Gain | 44 dB min |
Noise Figure | 16 dB typical |
See Datasheet for full specifications
This model has been replaced by the Amplifier Research 25U1000
Testimonials |
As always - thanks for your rapid response and support. -- Dave O. Tuscon, AZ |