REGATRON TC.P.32.1000.480
TopCon Quadro TC.P.32.1000.480, DC Power Supply, 1000V, 32A, 32kW

Download Product Datasheet

Available Option Configurations

Config-01

• No Options Included
• MSRP: $27,580 | Available for Rental    GET QUOTE  

Product Overview

RENT REGATRON TOPCON TC.P.32.1000 High Power DC Power Supply

The REGATRON TopCon Quadro power supply series offers full output control (0...100 %) of voltage, current and power as well as an adjustable internal resistance simulation.

In order to compensate the voltage drop on the line from the power supply to the load, a sense line can be connected. All models are equipped with a remote sense terminal as standard.

The primary switched compact power supplies from Regatron, including the TopCon Quadro TC.P.32.1000, provide excellent dynamics of output voltage, current, power and internal resistance simulation. This is the result of the uncompromised use of digital signal processors in an optimized multi-processor architecture and of a full digital controller structure. Typical system response times with ohmic loads are under 1 ms, with mixed ohmic / inductive loads around 1 to 2 ms.

The Regatron TopCon Quadro TC.P.32.1000 DC Power Supply from Regatron is successfully used for:

• Simulation and substitution of real DC sources like
• Batteries
• Solar panels
• Fuel cell stacks
• Supply of
• Burn-in and test systems
• Plasma loads e.g. surface technology
• Radar modulators (klystron, magnetron)
• Highly dynamic DC applications
• Pulse laser
• Demagnetizing and degaussing systems

The Regatron TopCon Quadro TC.P.32.1000 offers full output control (0...100 %) of voltage, current and power as well as an adjustable internal resistance simulation.

In order to compensate the voltage drop on the line from the power supply to the load, a sense line can be connected. All models are equipped with a remote sense terminal as standard.

The output power of the REGATRON TopCon Quadro series can be increased very easily: Power supply units with identical nominal output voltage and power can be operated in multi-unit master/slave operation. Parallel and series operation (up to 8 units) as well as matrix and multi load operation (up to 64 units) are available. Each unit in its basic design can be used as master or slave as desired by the user! In multi unit operation, only the master unit must be activated by the superposed control structure.

All regulation, monitoring and communication tasks are carried out by high-performance digital signal processors. The full digital regulation system delivers high accuracy, reproducibility and long-term stability, allows for load specific controller parameterization and enables programming of linear ramp functions related to "voltage-on" and set value steps. Explanation: "Soft calibration": Calibration and adjustment of the power supply unit by means of the PC software TopControl.

Tehnical Specfications of the Regatron TOPCON Quadro TC.P.32.1000 Power Supply includes:

AC line input

• Line voltage: 432 to 528VAC, 3-phase
• Line frequency: 48 to 62 Hz
• Mains connection type: L+PE (no neutral)
• Input current: 45 Arms 3-Phase
• Leakage current L to PE: < 20 mA

Output ratings

• Output power range: 0 to 32 kW
• Output voltage range: 0 to 1000 VDC
• Output current range: 0 tp 40 A
• Internal resistance range: 0 to 25000 mΩ

Operating modes

• Voltage regulation (CV): 0 to 100 % Umax
• Current regulation (CC): 0 to 100 % Imax
• Power regulation (CP): 5 to 100 % Pmax

Static accuracy

• Load regulation CV, CC: < ± 0.1 % FS
• Line regulation CV, CC: < ± 0.1 % FS 

Transient response time

• Load regulation CV, CC: < 2 ms
• Set value tracking CV, CC: < 2 ms

Stability

• CV, CC: < ± 0.05 % FS

Temperature coefficient

• CV: < 0.02 % FS / °C
• CC: < 0.03 % FS / °C

Output ripple

• 300 Hz Vpp: < 1.1 % FS
• 300 Hz Vrms: < 0.4 % FS

Output noise

• 40 kHz – 1 MHz Vpp: < 1.5 V
• 40 kHz – 1 MHz Vrms: < 0.1 V

Remote sensing

• Terminals on rear side: Line voltage drop compensation

General specifications include:

• Efficiency at nominal power: 95 %
• Weight: 64 kg
• Width front panel:483 mm
• Width housing: (19“) 444 mm
• Height front panel: 399 mm
• Height housing: 9 U) 394 mm
• Depth with output terminals: 590 mm
• Depth housing: 525 mm
• Line input connections: terminal block 4 x 25 mm
• Output terminals: nickel–plated copper bars, length: 40 mm, 1 hole 9 mm in each bar