Tektronix TDS3034C
Digital Phosphor Oscilloscope, 300 MHz, 4 Ch., 2.5 GS/s

Download Product Datasheet

Product Overview

ENT TEKTRONIX TDS3034C (call for availability)

The Tektronix TDS3034C Digital Phosphor Oscilloscope offers power and portablility in a compact battery-capable, easy to setup, and easy to use design. It provides a greater level of insight into complex signals by combining rapid, continuous waveform capture rate and real-time intensity grading so you can see, and solve, the problem faster. Plus, the history remains even after the acqusition is stopped. Unique digital real-time (DTR) sampling technology and sin(x)/x interpolation are combined in the Tektronix TDS3034C Digital Phosphor Oscilloscope allowing you to quickly debug, and accurately characterize, a wide range of signal types on all channels simultaneously, and there is no change in sampling rate when additional channels are turned on.

Features and Specifications of the Tektronix TDS3034C Digital Phosphor Oscilloscope include:

• Features:
  • Ease-of-Use Features:
    • Front-panel USB Host Port for easy storage and transfer of measurement data
    • 25 Automatic Measurements
    • FFT Standard
    • Multiple Language User Interface
    • WaveAlert® Automatic Waveform Anomaly Detection
    • TekProbe® Interface Supports Active, Differential, and Current Probes for Automatic Scaling and Units
  • Portable Design:
    • Lightweight Design (only 7 lb./3.2 kg) for easy transport
    • Optional Internal battery operation provides up to 3 hours without line power
  • Application Modules for Specialized Analysis:
    • Advanced AnalyModule
    • Telecommunications Mask Testing Module
    • Extended Video Module
    • 601 Serial Digital Video Module
  • Applications:
    • Digital Design and Debug
    • Video Installation and Service
    • Power Supply Design
    • Education and Training
    • Telecommunications Mask Testing
    • Manufacturing Test
    • General Bench Testing
• Specifications:
  • Key Performance Specifications:
    • Sample Rates up to 5 GS/s Real Time on all channels
    • 10 k Standard Record Length on all channels
    • 3,600 wfms/s continuous waveform capture rate
    • Suite of Advanced Triggers
  • Characteristics:
    • Electrical Characteristics:
      • Bandwidth:  300 MHz
      • Calculated Rise Time (typical):  1.2 ns
      • Input Channels:  4
      • External Trigger Input:  Included
      • Sample Rate on each channel:  2.5 GS/s
      • Record Length:  10 k points
      • Vertical Resolution:  9 bits
      • Vertical Sensitivity:
        • 1 MΩ:  1 mV/div to 10 V/div
        • 50 Ω:  1 mV/div to 1 V/div
      • Input Coupling:  AC, DC, GND
      • Input Impedance:  1 MΩ in parallel with 13 pF or 50 Ω
      • DC Gain Accuracy:  ±2%
      • Maximum Input Voltage:
        • 1 MΩ:  150_VRMS with peaks at ≤400 V
        • 50 Ω:  5_VRMS with peaks at ≤30 V
      • Position Range:  ±5 div
      • Bandwidth Limit:  20 MHz, 150 MHz
      • Time Base Range:  2 ns to 10 s
      • Time Base Accuracy:  ±20 ppm over any 1 ms time interval
    • Input/Output Interfaces:
      • Ethernet Port:  ±2RJ-45 connector, supports 10Base-T LAN
      • USB Port:  Front-panel USB 2.0 host port - supports USB flash drive
      • GPIB Port:  Full talk/listen modes, setting and measurements (Optional with TDS3GV Communications Module)
      • RS-232-C Port:  DB-9 male connector, full talk/listen modes; control of all modes, settings and measurements baud rates up to 38,400 (Optional with TDS3GV Communications Module)
      • VGA Video Port:  DB-15 female connector, monitor output for direct display on large VGA-equipped monitors (Optional with TDS3GV Communications Module)
      • External Trigger Input: 
        • BNC connector: 
          • Input impedance >1 MΩ in parallel with 17 pF
          • Max input voltage is 150_VRMS

Other models in this series:

TDS3012C, TDS3014C, TDS3032C, TDS3052C, TDS3054C