The R&S FSUP50 Signal Source Analyzer combines the functionality of a high performance spectrum and signal analyzer with the advantages of a phase noise test system, all in a single box. The R&S FSUP50 is a unique and simple-to-use one-box solution for measuring oscillators and synthesizers in development and production applications. In addition, the Rohde & Schwarz FSUP50 leads to enormous cost reductions.
The R&S FSUP50 analyzer is perfect for not only modern communications and broadcast systems, but also radar applications. Use the FSUP50 to measure phase noise and when characterizing oscillators, measure tuning slope, transient response, power, harmonics and spurious emissions, as well as amplifier noise. The integrated DC sources enable a wide range of additional measurements.
Features and specifications of the Rohde & Schwarz FSUP50 include:
Capabilities of the FSUP50 include:
Abbreviated specifications of the FSUP50:
Freq Offset | Input frequency, values in dBc (1Hz) |
5 MHz | 10 MHz | 100 MHz | 1 GHz | 3 GHz | 7 GHz | 10 GHz | 20 GHz | |
1 Hz | -114 | -116 | -87 | -75 | -62 | -55 | -52 | -48 |
10 Hz | -136 | -135 | -110 | -91 | -87 | -80 | -77 | -71 |
100 Hz | -143 | -146 | -134 | -115 | -106 | -97 | -95 | -89 |
1 kHz | -157 | -161 | -160 | -134 | -123 | -118 | -116 | -112 |
10 kHz | -165 | -168 | -168 | -143 | -131 | -129 | -126 | -120 |
100 kHz | -171 | -170 | -176 | -158 | -139 | -140 | -138 | -132 |
1 MHz | - | -175 | -177 | -165 | -160 | -155 | -150 | -146 |
10 MHz | - | - | -179 | -172 | -170 | -170 | -167 | -161 |
30 MHz | - | - | -179 | -172 | -170 | -170 | -170 | -165 |
VCO Parameter Characterization:
Measurement Parameters | VCO tuning characteristic, VCO tuning slope, power, pushing ON/OFF, harmonics measurement, VCO DC characteristic, summary |
Frequency Range | 10 MHz - 50 GHz | |
Power Supplies | tuning ports | 2 |
DC ports | 2 | |
additional ports | 1 |
Other model in this series:
Testimonials |
As always - thanks for your rapid response and support. -- Dave O. Tuscon, AZ |