Amplifier Research 600A225A
RF Amplifier, 10 kHz - 225 MHz, 600W
Amplifiers - RF and Microwave >> 1 GHz or Less and 101 Watt to 999 Watt >> RF Amplifier, 10 kHz - 225 MHz, 600W
Model: 600A225A
|
Download Product Datasheet
Product Overview
Rent Amplifier Research 600A225A Amplifier (Call for availability):
The Amplifier Research 600A225A is a self-contained, air-cooled, broadband, completely solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull LDMOS circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Amplifier Research 600A225, when used with an RF sweep generator, will provide a minimum of 600 watts of swept power.
The Amplifier Research 600A225 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a 3.75 inch diagonal graphic display, menu assigned softkeys, a single rotary knob, and four dedicated switches to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, forward RF sample port, and a reflective RF sample port for precise power measurements.
All amplifier control functions and status indications are available remotely in GPIB/IEEE-488, RS-232 and USB format. The buss interface connectors are located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier. High efficiency universal input, power factor corrected switching power supplies provides DC to all internal subassemblies.
Housed in a stylish, contemporary enclosure, the Amplifier Research 600A225 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, watt meter calibration, particle accelerators, plasma generation, communications and use as a driver for higher power amplifiers.
Functions and Specifications of Amplifier Research 600A225A Include:
RATED OUTPUT POWER: 600 watts
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3 dB compression
Nominal: 600 watts
Minimum: 550 watts
POWER OUTPUT @ 1 dB compression
Nominal: 550 watts
Minimum: 400 watts
FLATNESS: 2.5 dB maximum
FREQUENCY RESPONSE: 10 kHz–250 MHz instantaneously
GAIN (at maximum setting): 58 dB minimum
GAIN ADJUSTMENT (continuous range): 20 dB minimum
INPUT IMPEDANCE: 50 ohms, VSWR 1.5:1 maximum
OUTPUT IMPEDANCE: 50 ohms, nominal
MISMATCH TOLERANCE: 100% rated power without foldback
up to 6.0:1 mismatch, above which may limit to 300W reflected power.
Will operate without damage or oscillation with any magnitude and
phase of source and load impedance.
MODULATION CAPABILITY: Will faithfully reproduce AM, FM,
or pulse modulation appearing on the input signal
HARMONIC DISTORTION: Minus 20 dBc maximum at 400 watts
THIRD ORDER INTERCEPT POINT: 65 dBm typical
RF POWER DISPLAY: 0–750 watts full scale
PRIMARY POWER: 180–264 VAC 47–63 Hz, 2500 watts
maximum @ 0.99 P.F. typical
REQUEST A QUOTE
| Testimonials |
|
We received the unit today. Thank you for this. Your team did an excellent job. -- Bruce D. Phoenix, AZ |
