RENT AMPLIFIER RESEARCH 50W1000B RF Amplifier (Call for Availability)
The Amplfier Research 50W1000B is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in the high power stages to lower distortion and improve stability. The 50W1000B, when used with an RF sweep generator, will provide a minimum of 50 watts of swept power.
Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 50W1000B is protected from RF input overdrive by limiting diodes and an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. This 8-bit RISC microprocessor controlled board provides both IEEE-488 (GPIB) and asynchronous, full duplex RS-232 control of all amplifier functions.
Specifications for the Amplifier Research 50W1000B RF Amplifier Include:
Frequency | 1 MHz - 1000 MHz |
Rated Output Power | 50W |
Gain | 47 dB min |
See Datasheet for full specifications
This model has been replaced by the Amplifier Research 50U1000
Testimonials |
As always - thanks for your rapid response and support. -- Dave O. Tuscon, AZ |