Tektronix Encore




Anritsu MT8852B
Bluetooth Tester with EDR

Telecommunication and Wireless >> Cellular, Mobile Device and Wireless Radio Testers >> Bluetooth Tester with EDR
Rent Used Test Equipment
Manufacturer: Anritsu
Model: MT8852B

Anritsu MT8852B Bluetooth Tester with EDR

Electronic Test and Measurement Equipment

Anritsu MT8852B Bluetooth Tester with EDR Product Datasheet Download Product Datasheet

Rent Test Equipment

Available Option Configurations

Config-02

  • 19 - Audio measurements
  • 25 - EDR Measurements
  • 27 - Bluetooth Low Energy Option
  • 34 - Bluetooth Low Energy Data Length Extension
  • 35 - Bluetooth Low Energy 2LE (2 Mbps)
  • 5 - Bluetooth 5.0 Functions
  • MSRP: $38,363 | Available for Rental    GET QUOTE  

Product Overview

The Anritsu MT8852B Bluetooth Test Set is one of the market leading RF measuring instruments for design proving and production test of a wide range of products that integrate Bluetooth technology, including; phones, headsets, computers, audio-visual and gaming products as well as modules. In production, a single key press initiates a measurement script that tests a device in less than 10 seconds.

8 Bluetooth Basic Rate and 6 Bluetooth EDR transmitter and receiver test cases are supported in the MT8852B Bluetooth Test Set. EDR test cases supported include Relative Transmit Power, Carrier Frequency Stability/Modulation Accuracy, Differential Phase Encoding, Sensitivity, and BER Floor Performance.

The introduction of the Bluetooth low energy specification opens up a whole new range of applications including sports and fitness monitoring and health and wellbeing sensors. The new MT8852B low energy measurement option adds 6 low energy test cases to the standard product. These new test cases can be run as part of a test script so that test program creation is simplified and test times are minimized.

For audio measurement, the MT8852B supports all three codec air interfaces (µ-law, A-law and CVSD) on up to three SCO audio channels. It offers comprehensive testing facilities integrated within a Bluetooth wireless technology test set. Rear-panel jack-plug connectors provide analog inputs and outputs for all three audio channels.

The Adaptive Frequency Hopping (AFH) option facilitates analysis of interference from, and co-existence with, interfering signals such as WLAN. This option provides graphical displays of FER and masked channels when interfering signals are introduced, allowing optimization of hardware designs.

Features and specifications of the Anritsu MT8852B Bluetooth Test Set include:

  • Compliant with Bluetooth 1.2, 2.0 and 2.1, 3.0+HS and 4.0 core specification
  • Measurements performed as defined in the Bluetooth RF Test Specification
  • Qualified by Bluetooth SIG for RF measurements
  • 8 Basic Rate and 6 EDR transmitter and receiver test cases.
  • Enhanced Power Control (EPC) measurement included as standard
  • Initialization and control of test devices through USB and UART HCI control port
  • Option for Bluetooth low energy measurements
  • Built in support for Bluetooth low energy 2-Wire control interface
  • Single script runs Basic Rate, EDR and low energy tests
  • Tests RF performance of Bluetooth modules in under 10 seconds
  • BR/EDR/low energy dirty transmitter for receiver sensitivity test cases
  • Audio testing capability. 3 SCO channels with CVSD, u-Law and A-Law air interface.
  • Tests through antenna interface or cable connection
  • Easy operation: one touch testing with RUN key
  • Pre-programmed or user-defined test scripts
  • BlueSuite Pro3 software provides graphical traces of modulation, power ramp, individual channel measurements, and receiver sensitivity search
  • BlueTest 2 and CombiTest software for automated high volume production line testing
  • Adaptive Frequency Hopping software option for Bluetooth 1.2 device testing

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    


Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600