Agilent N5181B, Keysight N5181B, HP N5181B
MXG RF Analog Signal Generator, 100 kHz - 3 GHz or 6 GHz

Signal Generators >> Signal Generators Over 3 GHz, Up To 6 GHz >> MXG RF Analog Signal Generator, 100 kHz - 3 GHz or 6 GHz
Rent Used Test Equipment

Manufacturer: Keysight / Agilent / HP
Model: N5181B

Keysight / Agilent N5181B MXG RF Analog Signal Generator, 100 kHz - 3 GHz or 6 GHz

Electronic Test and Measurement Equipment

Download Product Datasheet
Rent Test Equipment

Available Option Configurations
Config-02

006 - Instrument security and removable memory card

099 - Expanded license key upgradability

302 - Avionics Liscense

303 - Multifunction generator

320 - Pulse train generator

506 - Frequency range, 9 kHz to 6 GHz

UNT - AM, FM, phase modulation

UNW - Narrow pulse modulation

UNY - Enhanced low phase noise

UNZ - Fast switching

MSRP: $60,655 | In Stock! GET QUOTE

Product Overview

RENT KEYSIGHT N5181B (Agilent) (call for availability)

The Keysight N5181B MXG RF Analog Signal Generator, with its pure and precise hardware performance, generates the signals you need for all of your R&D requirements and lets you take your devices and designs to the limit. It provides phase noise, non-harmonics, output power, and much more:

Test radar receiver sensitivity or characterize ADC or mixer signal-to-noise ratio, with unmatched phase noise and spurious performance
Drive receiver front-ends for out-of-band rejection with industry-leading output power
Simulate multi-channel composite analog modulation with integrated multifunction generator
Create variable RADAR PRI and pulse width with integrated pulse train generator

Features and Specifications of the Keysight N5181B (Agilent) MXG RF Analog Signal Generator include:

Signal Characteristics:
- 9 kHz to 3 or 6 GHz
- +24 dBm specified power to 3 GHz with electronic attenuator
- -146 dBc phase noise at 1 GHz and 20 kHz offset
- - 96 dBc non-harmonics at 1 GHz and > 10kHz offset
Modulation and Sweep:
- AM, FM, ØM, pulse, and narrow pulse
- Pulse train generator
- 10 MHz multifunction generator and LF out
- Digital step and list sweep modes
Automation and Communication Interface:
- 1000BaseT LAN, LXI, USB 2.0, and GPIB
- SCPI, IVI-COM, MATLAB drivers
- Backward compatible with ESG, MXG, PSG, and 8648x signal generators
- Agilent USB power sensor compatible with embedded display and SCPI control
Frequency Specifications:
- Frequency Range:
  - Option 503: 9 kHz to 3 GHz
  - Option 506: 9 kHz to 6 GHZ
- Resolution: 0.01 Hz
- Phase Offset: Adjustable in nominal 0.1 ° increments
- Frequency Switching Speed:
  - CW Mode:
    - SCPI Mode: ≤ 5 ms, typical
    - List /Step Sweep Mode: ≤ 5 ms, typical
- Frequency Reference:
  - Accuracy:
    - Adustment Resolution: < 1 x1 0^-10, nominal
    - Temperature Effects: < ± 2 x 10^-8 from 20 to 30 °C, nominal
    - Line Voltage Effects: < ± 1 x 10^-9 for ± 10% change
  - Reference Output:
    - Frequency: 10 MHz
    - Amplitude: ≥ +4 dBm, nominal into 50 Ω load
  - External Reference Input:
    - Input Frequency, standard: 10 MHz
    - Lock Range: ± 1 ppm
    - Amplitude: 5 dBm ± 2 dB, nominal
    - Impedance: 50 Ω, nominal
    - Waveform: Sine or square
- Sweep Modes (frequency and amplitude):
  - Operating Modes:
    - Step Sweep:
      - Equally spaced frequency and amplitude or
      - Logarithmically spaced frequency steps
    - List Sweep: Arbitrary list of frequency and amplitude step
  - Sweep Range: Within instrument frequency range
  - Dwell Time: 100 μs to 100 s
  - Number of Points:
    - Step Sweep: 2 to 65535
    - List Sweep: 1 to 3201
  - Step Change: Linear or logarithmic
  - Triggering: Free run, trigger key, external, timer, bus (GPIB, LAN, USB)
Amplitude Specifications:
- Output Parameters:
  - Settable Range: +30 to –144 dBm
  - Resolution: 0.01 dB, nominal
  - Step Attenuator: 0 to 130 dB in 5 dB steps electronic type
  - Connector: Type N 50 Ω, nominal
- Max Output Power:
  - 9 kHz to 10 MHz: +13 dBm
  - > 10 MHz to 3 GHz: +18 dBm
  - > 3 to 5 GHz: +16 dBm
  - > 5 to 6.0 GHz: +16 dBm
- Maximum Reverse Power, Nominal:
  - < 1 GHz: 50 W
  - > 1 to < 2 GHz: 25 W
  - > 2 to < 6 GHz: 20 W
  - Max DC voltage: 50 VDC
  - Trip Level: 2 W
- Amplitude Switching Speed:
  - CW Mode:
    - SCPI mode: ≤ 5 ms, typical
    - Power search SCPI mode: < 12 ms, measured
  - List / Step Sweep Mode: ≤ 5 ms, typical
Spectral Purity Specifications:
- Harmonics:
  - 9 kHz to 3 GHz: < –35 dBc
  - > 3 to 4 GHz: < –35 dBc, typical
  - > 4 to 6 GHz: < –53 dBc, typical
- Nonharmonics (CW Mode) (Standard (dbc)):
  - 9 kHz to < 5 MHz: –65, nominal
  - 5 to < 250MHz: –75
  - 250 to < 750 MHz: –87
  - 750 MHz to < 1.5 GHz: –87
  - 1.5 to < 3.0 GHz: –81
  - 3 to 6 GHz: –75
- Subharmonics (CW Mode):
  - 9 kHz to 1.5 GHz: None
  - > 1.5 to 3 GHz: –82 dBc (–91)
  - > 3 to 6 GHz: –74 dBc (–81)

Click to see all the Keysight / Agilent MXG Signal Generators

REQUEST A QUOTE

Testimonials

As always - thanks for your rapid response and support.

-- Dave O.
Tuscon, AZ

Customers who viewed this also viewed

Tektronix TSG4106A RF Vector Signal Generator, DC to 6 GHz

Rohde & Schwarz SMJ100A Vector Signal Generator, up to 6 GHz

Why Choose Axiom? Your testing is complicated enough, we want to make sourcing test equipment the easy part.
	Dedicated Customer Service We go beyond the role of order taker & strive to partner with you to provide a custom solution.	Competitive Prices Equipment is agressively priced. We work with you to find a solution to fit your budget.
	Fast Turnaround No long drawn-out sales process, We help you find the equipment you need, and get through order processing quickly so your equipment ships out fast!	Warranty & Support Comprehensive Parts and Labor warranty on all equipment sold. Includes a user manual, is fully accessorized, and tested to manufacturer specifications prior to shipment.

Agilent N5181B, Keysight N5181B, HP N5181BMXG RF Analog Signal Generator, 100 kHz - 3 GHz or 6 GHz

Config-02

Product Overview

REQUEST A QUOTE

Customers who viewed this also viewed

Why Choose Axiom?

Agilent N5181B, Keysight N5181B, HP N5181B
MXG RF Analog Signal Generator, 100 kHz - 3 GHz or 6 GHz