TDK-Lambda GEN300-17
Genesys Power supply, 300V, 17A, 5000W

Download Product Datasheet

Product Overview

TDK-Lambda GEN300-17

The TDK-Lambda GEN300-17 Genesys Power Supply sets a new standard for flexible, reliable, AC/DC power systems in a wide variety of applications including OEM, industrial and laboratory. The innovative architect of the GEN40-125 provides new, standard remote programming features such as global commands as well as new high-speed status monitoring. 

Features of the TDK-LAMBDA GEN300-17 include:

• High power density 5kW in 2U
• Wide range of popular worldwide AC inputs, 3Ø (208VAC, 400VAC)
• Active power factor correction (three-phase AC input)
• Output voltage up to 600V, current up to 600A (model dependent)
• Built-in RS-232/RS-485 interface standard
• Global commands for serial RS-232/RS-485 interface
• Last-setting memory
• High resolution 16 bit ADCs & DACs
• Low ripple & noise 
• Parallel operation with active current sharing; up to four identical units
• External analog programming and monitoring (user selectable 0-5V & 0-10V)
• Reliable modular and SMT design
• 19" rack mount capability for ATE and OEM applications
• Optional interfaces:
• Isolated analog programming and monitoring interface (0-5V/0-10V & 4-20mA)
• IEEE 488.2 SCPI (GPIB) multi-drop
• LXI Compliant LAN
• USB Interface
• LabView and LabWindow™ drivers

Specifications:

• Rated output voltage: 300V
• Rated output current:  17A
• Rated output power:  5100W 
• Remote voltage programming (16 bit):
• Resolution (0.012% of Vo rated):  36mV
• Accuracy (0.1% of Vo rated):  300mV
• Remote current programming (16 bit):
• Resolution (0.012% of Io rated):  2.04mA
• Accuracy (0.3% of Io rated+0.1% of Io actual output): 68mA
• Readback voltage:
• Resolution (0.012% of Vo rated):  36mV
• Accuracy (0.15% of Vo rated):  450mV
• Readback current:
• Resolution (0.012% of Io rated):  2.04mA
• Accuracy (0.4% of Io rated):  68mA
• OVP/UVL programming:
• Resolution (0.1% of Vo rated):  300mV
• Accuracy (0.1% of Vo rated):  3000mV
• Front Panel Description:
• On/Off Switch
• Air intake allows zero stacking for maximum system flexibility and power density
• Reliable encoder controls output voltage, address, OVP and UVL settings
• Volt Display shows output voltage and directly displays OVP, UVL and address settings  
• Reliable encoder controls output current, sets Baud rate and advanced parallel mode
• Current display shows output current and displays Baud rate; displays total current in parallel master/slave mode
• Function/status LEDs:  Alarm, Fine Control, Preview settings, Foldback mode, Remote mode, and Ouput on
• Pushbuttons allow flexible user configuration:
• Coarse and fine adjustment of output voltage/current and advanced parallel master or slave
• Preview settings and set voltage/current with output OFF, front panel lock
• Parallel master/slave
• Set OVP and UVL limits
• Set current foldback protection
• Go to local mode and select address and Baud rate
• Output ON/OFF and Auto/Save Re-Start mode
• Rear Panel Description:
• Remote/local output voltage sense connections
• DIP switches select 0-5V or 0-10V programming and other functions
• DB25 (female) connector allows (non-isolated) analog program and monitor and other functions
• RS-485 OUT to other Genesys power supplies
• RS-232/RS-485 IN remote serial programming
• Output connections: Rugged busbars for up to 100V output; wire clamp connector for outputs > 100V
• Exit air assures reliable operation when zero stacked
• Input:  208 & 400VAC three phase, 50/60 Hz

Click here to see other TDK-Lambda DC Power Supplies