Tektronix Encore




Keithley 2260B-250-13
Programmable DC Power Supply, Two 250V, 13.5A, 1080W

Power Supplies >> DC Power Supplies, High Voltage (60V and up), Low Current (less than 60A) >> Programmable DC Power Supply, Two 250V, 13.5A, 1080W
Rent Used Test Equipment
Manufacturer: Keithley
Model: 2260B-250-13

Keithley 2260B-250-13 Programmable DC Power Supply, Two 250V, 13.5A, 1080W

Electronic Test and Measurement Equipment

Keithley 2260B-250-13 Programmable DC Power Supply, Two 250V, 13.5A, 1080W Product Datasheet Download Product Datasheet

Rent Test Equipment

Config-ST-01

  • PWRUT A0
  • MSRP: $ 3,930 | Sales Price: $ 3,341    GET QUOTE  
Rent Test Equipment

Product Overview

Keithley 2260B-250-13 Power Supply

Rent Keithley Programmable Dual Channel DC Power Supply, Two 250V, 13.5A, 1080W

The Kiethley's 2260B-250-13 power supply has programmable rise time (or slew rate) control to prevent potentially dangerous inrush currents from flowing into loads that have low resistance when power is initially supplied. Either voltage or current rise time can be controlled. With voltage slew rate control, voltage rise time can range from a slow, 0.1V/s to a high speed of 60V/s. Programming a current rise time puts 2260B-250-13 in a constant current control priority mode, in which the current slew rate limits the rate at which the voltage rises across the device under test (DUT.) In addition to controlling rise time, fall time can also be programmed; fall time values can be different from rise time values. Delivery of power to a load can be precisely controlled to prevent overshoot spikes and excessive amounts of inrush current, eliminating damage to components, modules, or devices and generating more precise characteristic I-V curves for components such as LEDs.

Emulate the Response of a Battery Test a circuit or device under the most realistic conditions by applying a test source with the output resistance that is equivalent to the output resistance of the actual source that will be used to power the circuit or device. For example, a battery has a varying internal resistance, and a device powered by a battery will have a voltage applied to the device that is reduced by the voltage drop across the battery’s internal resistance. The 2260B-250-13 has an internal resistance of up to 18.51Ω to simulate a wide range of battery chemistries and load conditions. Flexible and Fast for Automated Test Systems With their USB, LAN, or optional GPIB interfaces, Series 2260B power supplies will work in any automated system. In addition, these power supplies have an analog control capability that can control outputs via an external voltage and resistance. Furthermore, 2260B-250-13 power supplies feature fast discharge capability to quickly dissipate the voltage on the output.

These power supplies also have a fast, 1ms transient recovery time to load changes. This combination of fast discharge time and fast transient response minimizes critical test time in automated test systems. Create Custom Voltage Source Waveforms An internal test sequence mode allows the 2260B 25013 to output a set of voltage levels for varying time intervals at each level. The test sequence can be stored and used repeatedly to determine DUT performance at number of voltage levels. In addition, the analog input control can be used to create voltage profiles that simulate how a battery responds to a fast changing load current requirement such as a large inrush current. Additionally, generate a combined DC output level with an AC signal superimposed on it to test how a circuit responds to noise on its DC power source. The analog input control parameter can be either a voltage input or a resistance input. With this analog control capability, numerous types of DC supply signals can be generated to test circuits and devices under a wide range of circumstances.

Features and Specifications of the Keithley 2260B-250-13 Power Supply includes:

  • Programmable voltage or current rise and fall times prevent damage to low impedance loads from inrush current
  • Constant current priority setting reduces voltage and current overshoot when powering LEDs
  • Programmable internal resistance simulates battery output
  • Choose from analog control, USB, LAN, or optional GPIB interface for automated control
  • Fit six 71mm wide 360W units or three 142mm wide 720W units or two 214mm wide 1080W units in a standard rack width to minimize bench and test system space
  • Applications
  • Environmental test, stress test, and accelerated life testing
  • LED and high power component testing
  • Automotive testing, Battery research and test, and production test
  • 0–250 V
  • 0–13.5 A
  • 1080 W

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    


Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2019 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600