Chroma 62024P-100-50
Programmable DC Power Supply, 100V, 50A, 2400W

Download Product Datasheet

Product Overview

CHROMA 62024P-100-50 POWER SUPPLY

The Chroma 62024P-100-50 Programmable DC Power Supply with its constant power operating envelope can provide high voltage/low current as well as low voltage/high current in a single instrument. This efficient design reduces the number of supplies needed in typical ATE and  benchtop applications. The Chroma 62024P-100-50 Programmable DC Power Supply also provides precision readback of output current and voltage and output trigger signals. It provides the ability to create complex DC transients waveforms to test device behavior to spikes, drops, and other voltage deviations and is perfect for automated testing DC-DC converters and similar products.

Features and Specifications of the Chroma 62024P-100-50 Programmable DC Power Supply include:

• Features:
  • Wider range of voltage & current within the power rating of the power supply
  • High-speed Programming
  • Precision V&I Measurements
  • Current sharing for parallel operation with Master/Slave Control
  • LXI option
  • Constant power operating envelope:
    • Provides higher currents at lower voltages
    • One power supply can do the job of two or three conventional supplies
    • No need for both high current/low voltage and low current/high voltage supplies to test a family of converters
  • High Accuracy current readback:
    • No need for current shunts/mux/DMMs to measure the converter's input current accurately
    • Work benches and test systems are less complex, less costly and can cover a wider range of converters
  • DC Transients:
    • Provides programmable control over voltage and current rise and falls times
    • Allows complex dc transients to be generated which are not possible with conventional power supplies
    • Supports:
      • Automotive transient testing per ISO16750-2
      • Shipboard - DO-160
  • Output Trigger:
    • Provides output trigger timing and precision event capturing
    • Ideal for ATE systems desiring to capture oscilloscope waveforms
  • VID Control:  Instruments include 8 independent programmable TTL signals which can be used for VID control or any general purpose logic controls
  • Soft Panels:
    • Advanced Labview graphical control panels
    • Allow for simple and efficient control and data gathering
• Specifications:
  • Output Rationgs:
    • Output Voltage:  0~100V
    • Output Current:  0~50A
    • Output Power:  2400W
  • Line Regulation:
    • Voltage:  0.01%+10mV
    • Current:  0.01%+12mA
  • Load Regulation:
    • Voltage:  0.01%+18mV
    • Current:  0.01%+28mA
  • Voltage Measurement:
    • Range:  20V / 100V
    • Accuracy:  0.05%+0.05%F.S.
  • Current Measurement:
    • Range:  10A / 50A
    • Accuracy:  0.1%+0.1%F.S.
  • Output Noise (0-20MHz):
    • Voltage Ripple (P-P):  100 mV
    • Voltage Ripple (ms):  15 mV
    • Current Ripple (ms):  20 mA
  • OVP Adjustment Range:  110% of Vset to 110% of Vmax
  • Slew Rate Range:
    • Voltage (with USB):  0.001V - 10V / ms
    • Current (with USB):  0.001A - 1A / ms
  • Programming Response Time (Typical):
    • Rise Time (Full & No Load):  10 ms
    • Fall Time:  300 ms(max)
  • Efficiency:  0.85
  • Drift (8 hours):
    • Voltage:  0.02% of Vmax
    • Current:  0.04% of Imax
  • Temperature Coefficient:
    • Voltage:  0.02% of Vmax / °C
    • Current:  0.04% of Imax / °C
  • Transient Response Time:  3mS
    • 10% Step Change:  250 mV
    • Voltage Limit @ Series Mode:  500V
  • AC Input Voltage Ranges:  190 to 250Vac (single phase)

Click to see all the models in this series