Tektronix TCP0030A
Current Probe, AC/DC, DC to 120 MHz, 30 A DC

Download Product Datasheet

Available Option Configurations

Config-01

• No Options Included
• MSRP: $5,530 |Used starting at: $2,695
  
• In Stock!    GET QUOTE  

Product Overview

The Tekronix TCP0030 AC/DC Current Probe is a high-performance and easy-to-use probe that enhances the bandwidth with selectable measurement ranges and also provides low-current measurement  capability and accuracy. The Tektronix TCP0030 Probe is designed specifically for those oscilloscopes that have the TekVPI™ probe interface.

Features and Specifications of the Tektronix TCP0030 AC/DC Current Probe include:

• Features:
  • Easy-to-use and accurate AC/DC current measurements
  • Connects directly to oscilloscopes with the TekVPI™ Probe Interface
  • Provides automatic units scaling and readout on the oscilloscope display
  • Embeds the probe characteristics within the oscilloscope
  • Fully programmable over the oscilloscope's interface
  • Split-core construction allows easy circuit connection
  • High accuracy with typically less than 1% DC gain error
  • Accurately measures current levels as low as 1 mA
  • Low Noise and DC Drift
  • Easy to degauss and autozero
  • Setup controls and probe status/diagnostic indicators are provided on both the probe hardware, and through an easy-to-access oscilloscope UI display menu
  • Remote GPIB/USB probe control through the oscilloscope
  • Safety certified for U.S. and Canada
  • Applications:
    • Power supplies
    • Semiconductor devices
    • Power inverters/converters
    • Electronic ballasts
    • Industrial/consumer electronics
    • Mobile communications
    • Motor drives
    • Transportation systems
• Specifications:
  • Bandwidth:  DC to ≥120 MHz
  • Rise time:  ≤2.92 ns
  • Max RMS current:  30 A
  • Max peak pulse current:  50 A
  • Jaw Diameter: 5mm
  • Certified for bare wire voltages up to 150 V CAT II
  • Minimum sensitivity:
    • 1 mA (on oscilloscopes that support 1 mV/div setting)
    • AC Coupling (on oscilloscopes that support AC/DC coupling)
  • Current ranges:  5 A and 30 A
  • DC accuracy:
    • Typical:  ±1%
    • Warranted:  ±3%
  • Max amp-second product:  500 Aμs (in 30 A Range)
  • Insertion impedance:
    • 1 mΩ at 10 kHz
    • 3.5 mΩ at 100 kHz
    • 0.08 Ω at 1 MHz
    • 0.15 Ω at 10 MHz
    • 0.7 Ω at 100 MHz
    • 0.85 Ω at 120 MHz
  • Signal delay:  14.5 ns