Agilent E5061A, Keysight E5061A, HP E5061A
ENA-L RF Network Analyzer, 300 kHz to 1.5 GHz

Download Product Datasheet

Product Overview

RENT AGILENT / HP E5061A NETWORK ANALYZER (Call for Availability)

The Agilent / HP ENA-L RF Network Analyzer is a general purpose analyzer that provides reliable basic S-parameter measurements with easy-to-use features and solid performance based on the latest in modern technologies.

Features and Specifications of the Agilent / HP E5061A Analyzer include:

• Features:
• Easy to use features
• Integrated T/R or S-parameter test set
• Built-in Visual Basic® for Applications (VBA)
• Specifications:
• Frequency:  300 kHz to 1.5 GHz
• Impedance:  50 or 75 Ω test port
• Dynamic range:  120 dB
• Trace noise: 0.005 dB rms
• IF bandwidth settings:
• Range:  10 Hz to 30 kHz
• Nominal settings are:  10, 30, 100, 300, 1 k, 3 k, 30 k
• RF connectors:  
• Typ-N, female
• 50 Ω or 75 Ω
• External trigger connector:
• Type:  BNC, female
• Input Level:
• Low threshold voltage:  0.5 V
• High threshold voltage:  2.1 V
• Input level range:  0 to +5 V
• Pulse width:  ≥ 2 μsec
• Polarity:  Negative (downward) only
• External reference signal input connector:
• Type:  BNC, female
• Input frequency:  10 MHz ± 10 ppm
• Input level:  0 dBm ±3 dB
• Internal reference signal output connector:
• Type:  BNC, female
• Output frequency:  10 MHz ± 10 ppm
• Signal type:  Sine wave
• Output level:  0 dBm ±3 dB into 50 Ω
• Output impedance:  50 Ω
• VGA video output:  
• 15-pin mini D-Sub, female
• Drives VGA compatible monitors
• GPIB:  
• 24-pin D-Sub (type D-24), female
• Compatible with IEEE-488
• Parallel port:
• 36-pin D-Sub (type 1284-C), female
• Provides connection to printers, or multiport test set
• USB port:
• Universal serial bus jack, type A configuration (4 contacts inline, contact 1 on left), female
• Provides connection to printers, ECal module, USB/GPIB interface
• Contact 1:  Vcc: 4.75 to 5.25 VDC, 500 mA, maximum
• Contact 2:  -Data
• Contact 3:  +Data
• Contact 4:  Ground
• LAN:
• 10/100 BaseT Ethernet, 8-pin configuration
• Auto selects between the two data rates
• Handler I/O port:
• 36-pin Centronics, female
• Provides connection to handler system
• Line power (a third-wire ground is required):
• Frequency:  47 Hz to 63 Hz
• Voltage:  90 to 132 VAC, or 198 to 264 VAC (automatically switched)
• VA maximum:  350 VA maximum

Click to see all Keysight / Agilent ENA network anlyzers