Keithley 2602
SourceMeter, 3A DC, 10A Pulse 40W, 2 Ch.

Download Product Datasheet

Product Overview

RENT KEITHLEY 2602 SourceMeter (call for availability)

The Keithley 2602 SourceMeter lets you make precision DC, pulse, and low frequency AC source-measure tests faster, easier, and more economically than ever before. The Keithley 2602 offers two to four times the test speed of competitive products for I-V functional testing by combining:

• Keithley’s high speed, third-generation Source-Measure Unit (SMU) design
• An embedded Test Script Processor (TSP™)
• TSP-Link™, a fast triggering and inter-unit communication bus

The Keithley 2602 packs twice the source-measure channel density of the Model 2601 in the same size enclosure, so you can configure multi-channel systems in very little rack space. Each 40W, 3A channel is electrically isolated to ensure high measurement integrity and wiring flexibility. The Keithley 2602 packs many instruments into a small package, including:

• A precision power supply
• A true current source
• A 51/2-digit multimeter
• A voltage or current pulse generator with measurement
• A low frequency arbitrary waveform generator
• An electronic load
• A trigger controller

Features and Specifications of the Keithley 2602 include:

• TSP-Link allows connection of multiple 2600 series instruments in a master/slave config allowing unlimited scalability
• On-board Test Script Processor processes and runs complex sequences from the instrument - gives you up to 10X greater throughput
  • allows creation of custom measurement functions for components such as varistors, diodes and BJTs/FETs, or algorithm based tests like I-V sweeps with power compliance, linearity and latch-up test sequences, and thermal response tests.
• Store up to 50,000 lines of TSP code and more than 200,000 readings in 16MB of nonvolatile memory.
• Measure I and V simultaneously on each channel at >10,000 readings/s. Execute a full source-measure cycle on any channel in just 200µs
• Ensure repeatable timing and high throughput with the high speed auto-ranging function.
• GPIB, RS-232 and 14-bit digital I/O interface ports are standard
• Current measure range (per channel) 1pA to 3A
• Current source range (per channel) 5pA to 3A
• Basic current programming accuracy 0.03%
• Basic current measurement accuracy 0.02%
• Voltage measure range (per channel) 1µV to 40V
• Voltage source range (per channel) 5µV to 40V
• Basic voltage programming accuracy 0.02%
• Basic voltage measurement accuracy 0.015%
• Readings to memory 10,000/s
• Sweep source change and reading to memory 5,500/s
• Sweep source change and reading to GPIB 3,600/s
• Spot readings to GPIB 1,100/s
• Spot source change and reading to GPIB 880/s
• Pulse capability 200µs minimum source/measure pulse