Tektronix Encore




Agilent 4291B, Keysight 4291B, HP 4291B
RF Impedance Analyzer, 1 MHz -1.8 GHz

Component Analyzers, LCR, Semiconductor >> Impedance, Capacitance and LCR >> RF Impedance Analyzer, 1 MHz -1.8 GHz
Rent Used Test Equipment
Manufacturer: Keysight / Agilent / HP
Model: 4291B

Keysight / Agilent 4291B RF Impedance Analyzer, 1 MHz -1.8 GHz

Electronic Test and Measurement Equipment

Keysight / Agilent 4291B RF Impedance Analyzer, 1 MHz -1.8 GHz Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

The HP/Agilent 4291B RF impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The HP/Agilent 4291B uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.

The HP/Agilent 4291B also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.

The HP/Agilent 4291B has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format.

Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.

Other features and specifications include:

  • Four component test fixtures (DUT size: 0.5 mm to 20 mm)
  • Independent parameter selection in 2 channels 
  • Direct read-out permittivity, permeability (option) 
  • Two material fixtures (operating temperature: -55deg C to +200deg C) 
  • Versatile analysis (temperature, cole-cole plot, relaxation time) 
  • Sweep parameters (frequency, ac level, dc bias, temperature)

 

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    



YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600