Quadtech / IET 7600 PLUS
LCR Meter, 10 Hz - 2 MHz

Download Product Datasheet

Product Overview

The IET / Quadtech 7600 Plus LCR Meter features:

Swept Measurements: Fast and accurate swept parameter measurements, graphical or tabular, for verification of component and material response to changes in ac test frequency, ac test voltage or ac test current, without the need for complex programming or an external controller.

Program and Data Storage: With The Quadtech (IET) 7600 Plus LCR Meter, test setups can be stored and recalled either internal memory or from the USB memory stick. Measured data can be stored on a memory stick and then transferred to PC for data reduction and analysis.

Load Correction: Substantially improves instrument accuracy by performing measurements on a known standard and applying the correction to subsequent measurements. Ideal for repetitive testing of identical devices at like test conditions.

Automatic Calibration Procedure: The Quadtech 7600 Plus LCR Meter can be calibrated without returning the unit to the factory using the NIST traceable QuadTech Calibration Kit, reducing down time and calibration costs.

Easy to Use: Large LCD graphics display and user friendly menu driven interface allows the 7600 PLUS to be put on line quickly, providing useful measurements by operators with little to no training.

Features, specifications and highlights of the IET 7600 Plus LCR Meter include:

• The widest possible frequency range: 10 Hz to 2MHz
• The graphical sweep function of a measured parameter vs. frequency, voltage or current
• A lower cost alternative to the Agilent E4980A
• Measures 14 Impedance Parameters (2 simultaneously)
• 0.05% Basic Measurement Accuracy
• Programmable Frequencies from 10Hz to 2MHz
• AC Test Voltage Programmable from 20mV to 5V
• DC Bias Voltage, 2V Internal or 0 to 200V External
• Fast Measurement Speeds up to 120/Second
• Automatic Open/Short Zeroing Eliminates Connection Errors
• High Resolution LCD with 7 Digit Display
• 14 Hi/Lo Sorting Bins for Pass/Fail Testing
• RS-232, USB, Printer, IEEE-488 optional and PLC Interfaces all Standard
• Results Displayed as Deviation or %Deviation from a Nominal Value
• Internal Storage and Recall of Test Setups
• Constant Voltage Maintained to the Device Under Test
• Ability to Automatically Perform 6 Unique Tests in Sequence
• Keypad Lockout Prevents Changes to the Test Setup
• On site calibration with NIST Traceable Cal Kit
• Programmable Average and Delay Times