ETS Lindgren 2090
Postioning Controller
Compliance Testing - EMC, ESD, EMI, RFI >> Accessories and Other >> Postioning Controller
Model: 2090
|
Download Product Datasheet
Product Overview
ETS-Lindgren 2090 (Emco)
The ETS-Lindgren 2090 Multi-Device Positioning Controller is designed for use with ETS-Lindgren positioning devices such as Antenna Towers, Turntables, Reverberation Paddles, Multi-Axis Positioners, etc. to accomplish a variety of tests from EMC compliance, antenna pattern measurements, and more.
The Model 2090 Multi-Device Positioning Controller allows the user to synchronize the simultaneous, yet independent movement of two primary devices such as towers or turntables in either manual or remote GPIB modes while controlling the on/off operation. The fiber optic control lines that attach devices to the unit eliminate extraneous RF interference signals that can normally be conducted through wire signal cables.
The front panel of the Model 2090 Multi-Device Positioning Controller provides interface for two separate and complete device controllers, each with identical displays and function keys. The function keys let the user configure device specific parameters, adjust limit and position settings, and control device interface to show positioning and operational information, as well as device parameter settings. In addition to the two primary device interfaces, there is an auxiliary control interface for four auxiliary devices. This interface provides keys and indicators to allow the user to manually toggle the auxiliary devices on and off.
The Emco 2090 Multi-Device Positioning Controller provides and extensive set of parameters for configuration of the controller and the attached devices. GPOB commands are provided to allow programs to determine the device type and configuration. Parameters like encoder calibration allow the Model 2090 Multi-Device Positioning Controller to control non-ETS-Lindgren products using a suitable adapter kit.
Key features of the ETS-Lindgren 2090 include:
- Automatic soft position limit settings
- Control for 2 primary and 4 auxiliary devices
- Fiber Optic Control Lines
- Speed control
REQUEST A QUOTE
| Testimonials |
|
I just wanted to say thank you. You guys are constantly dealing with our outrageous (and sometimes off the wall) demands and requests with the upmost care and professionalism. You guys are quick and give a level of quality that you dont often see, it is refreshing and a wonderful feeling to know that you guys have our backs. -- Tony B. Carlsbad, CA |
