Tektronix Encore




Kikusui KES4021
ESD Simulator, 30 kV

Compliance Testing - EMC, ESD, EMI, RFI >> ESD Simulators >> ESD Simulator, 30 kV
Rent Used Test Equipment
Manufacturer: Kikusui
Model: KES4021

Kikusui KES4021 ESD Simulator, 30 kV

Electronic Test and Measurement Equipment

Kikusui KES4021 ESD Simulator, 30 kV Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

The Kikusui KES4021 Electrostatic Discharge Simulator allows immunity testing on electrical and electronic devices by simulating a direct or indirect electrostatic discharge from a charged human operator.

Features of the Kikusui KES4021 ESD Tester include:

  • Electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard
    • KES4021 is a slim, lightweight electrostatic discharge simulator that complies with the EN/IEC61000-4-2 standard. *
  • Maximum testing voltage of ±30 kV exceeds all prescribed test levels
    • The simulator can produce a maximum testing voltage of ±30 kV, allowing testing at higher levels than those required by the IEC standard Level 4 (± 15 kV). This allows you to identify the limit voltages at which the product being tested either malfunctions or breaks down.
  • Support of ISO 10605 standard (*1)
    • By fitting a different CR unit and discharge chip in the discharge gun, you can use the simulator to produce the waveform prescribed in the ISO 10605 standard, which specifies electrostatic discharge test methods for evaluating electronic modules for automotive use.
  • Tip charge prevention feature
    • During a test, the high-voltage power remains in standby mode until you press the TRIGGER switch.
  • Discharge Method: Contact Discharge and Air Discharge
  • Set Voltage: 0.50 kV to 30 kV
  • Polarity: Positive and Negative
  • Energy Storage Capacitor: 150 pF ± 10% (replaceable)
  • Discharge Resistor: 330 O ± 10% (replaceable)
  • Charge Resistor: 50 MO
  • Discharge Interval: 0.05 / 0.1s to 99.9s
  • Number of Discharges: 1 to 999 / Continuous
  • Trigger: Main Panel Trigger and Discharge Gun Trigger
  • Discharge Current Waveform: Compliant with the IEC61000-4-2 standard
  • Interface: RS-232C (optional)
  • Power Supply: 100 V to 240 V AC (50 Hz to 60 Hz)

(*1)The main unit of the electrostatic discharge (ESD) simulator does not adopt floating output. The ISO10605 Standards specify that generators must feature floating output. However, for safety reasons, the KES4021 does not adopt floating output

A variety of discharge tips are available for use with the KES4021.

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial







Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    



YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600