Tektronix Encore

emtest UCS500N5
Multifunction Test Generator, 5.5kV (EFT/Burst, Surge & Power Fail)

Compliance Testing - EMC, ESD, EMI, RFI >> EMC, EMI and RFI Test Systems and Analyzers >> Multifunction Test Generator, 5.5kV (EFT/Burst, Surge & Power Fail)
Rent Used Test Equipment
Manufacturer: emtest
Model: UCS500N5

emtest UCS500N5 Multifunction Test Generator, 5.5kV (EFT/Burst, Surge & Power Fail)

Electronic Test and Measurement Equipment

emtest UCS500N5 Multifunction Test Generator, 5.5kV (EFT/Burst, Surge & Power Fail) Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT emtest UCS500N5 (call for availability)

The emtest UCS 500N5 ultra-compact simulator is one of the most versatile testers to cover transient and power fail requirements according to international standards (basic and generic standards) and product/product family standards. The UCS500N5 is the most economic solution for tests during development as well as for full-compliant immunity tests and CE Marking for single phase DUT with the ability to be extended for testing three-phase DUTs by means of an automatically controlled external coupling network up to 100A.

The emtest UCS 500N5 includes everything necessary to conduct fully compliant tests. The power mains supply for the controls and for the DUT is separate to render it more flexible to use with different DUT supply voltages.

The emtest UCS500N5 can be operated manually from the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. Safety features such as interlock and warning lamp control are available.

Pre-programmed Standard Test routines allow highest user convenience. The UCS 500N5 also features a Quick Start test routine where parameters can be changed on-line during the test to evaluate the susceptibility level of an individual DUT.

Outstanding user convenience, clearly structured windows and operation features and the EM TEST standards library along with the flexibility to generate user specific test sequences very easily are the main features of iec.control software. The software is automatically configured according to the connected EM TEST generators. Extensive reporting capabilities help the user to create test reports that meet international requirements.

iec.control sotware is supported by Windows 2000, Windows XP, Windows Vista and Windows 7. Remote control is achieved either via USB or GPIB. iec.control supports a wide range of GPIB cards of National Instruments.

Product highlights of the emtest UCS500N5 include:

  • Burst module (IEC/EN 61000-4-4) up to 5.5kV
  • Surge module (IEC/EN 61000-4-5) up to 5kV
  • PowerFail module (IEC/EN 61000-4-11)
  • Magnetic field tests with optional accessoires
  • Built-in single phase coupler 300V/16A
  • Manual operation from front panel
  • USB and GPIB-Bus for remote control
  • Monitor outputs for peak voltage and peak current
  • Fail inputs
  • External variac control 0-10Vdc
  • Control of external three-phase couplers
  • Ability to set all parameters even during the test
  • Select directly from statndard test levels
  • Stastistical test options
  • Predefined tests

The UCS500N5 has been replaced by the newer and improved emtest NX5

Request A Quote

Rent      Buy      Repair


Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    

YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE

© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600