Tektronix Encore

Haefely PSURGE 4010
Combination Wave Surge Generator

Compliance Testing - EMC, ESD, EMI, RFI >> EMC, EMI and RFI Test Systems and Analyzers >> Combination Wave Surge Generator
Rent Used Test Equipment
Manufacturer: Haefely
Model: PSURGE 4010

Haefely PSURGE 4010 Combination Wave Surge Generator

Electronic Test and Measurement Equipment

Haefely PSURGE 4010 Combination Wave Surge Generator Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

RENT HAEFELY PSURGE 4010 Generator (call for availability)

The Haefely PSURGE 4010 Combination Wave Surge Generator is a one box solution for:

  • IEC / EN 61000-4-5 Edition 1 and 2
  • EN 61000-6-1
  • EN 61000-6-2

Surge voltage transients are caused by switching and lightning effects. The Haefely PSURGE 4010 allows evaluation of the performance of equipment when subject to highenergy disturbances on power and interconnection lines.

Features of the Haefely PSURGE 4010 include:

  • Combination wave Voltage:
    • 1,2/50us
    • Current: 8/20us
  • Impulse voltage: 200V ... 4.2kV
    • Impulse current: 100A ... 2.1kA
    • Maximum impulse repetition rate 12 per minute
    • Positive, negative and user definable alternating polarity
    • Integrated CDN for 16A at 264Vac and 110Vdc
    • Impulse voltage, current and EUT current measurement
    • Test parameter ramp functions
    • Phase angle synchronization
    • 18 test and 18 program memory locations
    • Remote control using WinFEAT&R©

Benefits of the Haefely PSURGE 4010 include:

  • Totally reproducible test results
  • Consistent pulse parameters
  • Fully automatic execution of complex test routines and sequences
  • Cost effective solution
  • Expandable to 3 phase testing with FP-SURGE 32.1
  • Expandable to impulse magnetic field testing (IEC 61000-4-9) with MSURGE

Technical Specifications of the Haefely PSURGE 4010 include:

  • Waveshape 1,2/50us and 8/20us according to IEC 61000-4-5
  • Impulse Voltage 200V ... 4.2kV
  • Impulse Current 100A ... 2.1kA
  • Impulse Repetition Up to 12 per minute
  • Impulse Polarity Positive, Negative, Alternating
  • Power supply 85V ... 264V, 50/60Hz
  • Internal single-phase CDN
    • max. AC power 264V / 16A, 50-60Hz on Schuko plug
    • max. DC power 110V / 16A
    • Coupling mode 18uF and 9uF+10O / acc. to IEC 61000-4-5

The internal microprocessor, and intelligent user interface making use of main function hard-keys, makes this device very user friendly. The following points further increase user flexibility :

  • Programmable and variable parameters make PSURGE 4010 ideal for development and quality engineers.
  • Permanent storage of tests and programs
  • Alphanumeric input
  • Multi-mode LCD display
  • Test report generated directly to a printer without using an external computer
  • Easy remote control programming with an external computer and WinFEAT&R software

The PSURGE 4010 generator is fully compliant to the IEC requirements. A solid state high voltage switch provides very accurate reproducible tests, long life expectancy and accurate phase synchronisation. Product quality is enhanced by:

  • An integrated current protected couplingdecoupling network
  • Decoupling inductors that maintain the impulse waveform
  • Integrated high performance peak measurements of impulse voltage and current
  • Safety circuit and emergency stop circuit provide high personnel protection

High flexibility and operation of tests is achieved through:

  • Fully automatic test sequences
  • EUT failure detection and protection by programmable current limits
  • EUT failure detection with integrated “EUT Failed” input connector
  • Centronix interface for printer
  • A serial RS-232 interface enable operation from a computer
  • Expansion into an automatic 3-phase system
  • Possibility to fulfil IEC 61000-4-9 with an optional coil antenna

Request A Quote

Rent      Buy      Repair


Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    

YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE

© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600