|
RENT ADDITEL ADT901B-N 6 psi Low Pressure Test Pump (Call for Availability)
The Additel ADT901B-N 6 psi Low Pressure Test Pump is a hand operated pressure pump designed to generate pressures from -6 psi (-0.4 bar) to 6 psi (0.4 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 0.1 Pa (0.001 mbar). Additel ADT901B-N 6 psi Low Pressure Test Pump is easy-to-use where pressure could be set and adjusted precisely and quickly through a simple turn of the handle.
Additel ADT901B-N 6 psi Low Pressure Test Pump is a very stable low pressure calibrator. It makes use of an isothermal bellows chamber which is designed for reducing the possible effects of environmental temperature change. Most pumps make use of a check valve (non-returning valve) and are not well insulated, which will cause large fluctuations in pressure with a change in ambient temperature or when the unit is touched. Additel ADT901B-N 6 psi Low Pressure Test Pump does not use a check valve and is remarkably stable. Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.
Specifications for the ADDITEL ADT901B-N 6 psi Low Pressure Test Pump Include:
| Pressure Range | -6 psi (-0.4 bar) to 6 psi (0.4 bar) |
| Adjustment Resolution | 0.1 Pa (0.001 mbar) |
| Media | Air |
| Pressure port type | 1/4 NPT male |
See Datasheet for full specifications
| Testimonials |
|
I have used Axiom Test Equipment for a number of years now and have found them to be reliable and well priced. Axiom stands behind their equipment and I always have confidence that I will get what I paid for. -- Don Milpitas, CA |