Tektronix Encore




Yokogawa MT210 MODEL 767370
Digital Manometer

Calibrators >> Accessories and Other >> Digital Manometer
Rent Used Test Equipment
Manufacturer: Yokogawa
Model: MT210 MODEL 767370

Yokogawa MT210 MODEL 767370 Digital Manometer

Electronic Test and Measurement Equipment

Yokogawa MT210 MODEL 767370 Digital Manometer Product Datasheet Download Product Datasheet

Rent Test Equipment

Product Overview

The MT210 Digital Manometer combines YOKOGAWA's best pressure measurement technology, offers excellent accuracy, reliable operation, and a variety of applications. The MT210 provides the perfect field and lab solution for a wide range of technologies. Features of the MT210 model 767370 Differential Pressure Model include:

    • High performance and reliable operation
    • High performance, high resolution
      • The MT210 features high performance, and a high, basic accuracy of ±0.01% thanks to the YOKOGAWA-original silicon resonant sensor.
    • High allowable input pressure
      • The maximum allowable input pressure is 0 to 1 kPa. Now you don't have to worry about sensor breakdown due to overrange pressure input.
    • Readout Range: -1.20000 to 1.20000 kPa
    • Accuracy six months after calibration: ±(0.015% of reading +0.03% of full scale)
    • Response Time: Approx. 5 sec max.
    • Resolution: 0.00001kPa
    • Allowable Input: 1 Pa abs to 50 kPa gauge
    • Temperature Effect: Zero point: ±0.005% of full scale/°C Span: ±0.001% of full scale/°C
    • Leak Rate: 10-5 cm3/sec max.
    • Applicable Fluids: Gases and non-flammable, non-explosive, non-toxic and non-corrosive liquids
    • Fluid Temperature: 5 to 50°C
    • Liquid Viscosity: 5 x 10-6 m2/sec max.
    • Pressure Sensor: Silicon resonant sensor
    • Pressure Sensing Element: Diaphragm
    • Minimal effect of temperature changes
      • The silicon resonant sensor is highly immune to environmental discrepancies such as temperature changes.
    • Applicable to both gases and liquids
      • Never be bothered by the labor of switching between models. The MT210 can measure both gases and liquids. With the new 767370 differential-pressure model, you can measure liquids that you couldn't measure before with the MT110-series differential-pressure models
  • Ease of systemization
    • D/A conversion output The D/A-converted signal of a measured value is output through an external terminal. This feature permits you to easily send data to your measurement system or recorder

Observation examples of D/A conversation output

  • Differences due to the measurement mode, where the normal-speed waveform is when the Moving-average option is turned off
  • Close-up of output waveform (with the dynamic mode enabled)
  • Comparator output and external trigger input Use these I/O functions to set the upper and lower limits, judge the measured value, and output the result through an external terminal. What's more, you can apply a start-of-measurement trigger using a falling edge of an external trigger signal. These features will help automate your production/inspection lines of pressure-related products.
  • GP-IB and RS-232 interfaces This feature lets you read measured values into your PC or set measurement conditions from the PC. Communication is still possible even when the MT210 is operated on batteries or the DC power source.
  • Support of field use
    • 12-V DC power supply
      • The MT210 operates on a 12-V DC power supply. This feature is useful for in-vehicle tests. Operation on Ni-Cd battery pack
    • Operation on Ni-Cd battery pack
      • The MT210 which comes standard with a built-in battery charger, can continuously operate on an optional Ni-Cd battery pack for approximately 10 hours.
  • Assured compatibility with earlier models
    • Inheritance of performance from MT110 Series
      • The MT210 features additional functions such as support of high-speed measurement, while inheriting the basic performance from their predecessor, the MT110.
  • Common communication commands
    The MT210/210F series share the GP-IB and RS-232 communication protocols with their predecessor, the MT110. No modifications to the communication protocols are necessary when expanding a system that uses the earlier series or when replacing the series.
  • Applications of the Yokogawa MT210 Model 767370 Digital Manometer include:
    • Using the MT210 as a pressure standard
    • Calibrating & inspecting pressure sensors, pressure gauges, or blood pressure meters in a production line
    • Calibrating & inspecting aircraft instrumentation (altimeters / speedometers)
    • Measuring pressure loss in radiators
    • Measuring differential pressures for clean rooms or benches
    • Monitoring pressure in a performance test of electronic components under low atmospheric pressure
    • Measuring the volume of airflow of air-conditioners
    • Measuring the wind speed of hair dryers
    • Measuring the amount of airflow of air cleaners
  • Other applications include:
    • Calibrating and inspecting flowmeters; measuring working pressure of pneumatic actuators; measuring pressure in a production/inspection line of valves; controlling the atmospheric pressure of standards rooms; monitoring the pressure of dead-weight pressure gauges; measuring the suction and exhaust pressures of an engine; measuring the static pressure of an engine cooling fan; measuring pressure in wind-tunnel experiments; measuring the pressure of refrigerator coolants; measuring the amount of airflow of ventilating fans; measuring the amount of airflow and static pressure of cooling fans and more.

Request A Quote

Rent      Buy      Repair
SUBMIT REQUEST
760-806-6600


Testimonial


  GET QUOTE  



Customers who viewed this also viewed


Fluke 5500A Calibrator, Multi-Product
Fluke 5500A Calibrator, Multi-Product

Fluke 5502A Multi-Product Calibrator
Fluke 5502A Multi-Product Calibrator





Home   |   Rental Equipment   |   Equipment Sales   |   Repair & Calibration   |   Sell Your Equipment   |   About Us   |   Contact   |   Get A Quote   |   Blog    



YouTube Facebook Google Plus Paypal
Get the latest deals first. Subscribe to our newsletter.    SUBSCRIBE


© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML     
© 2020 Axiom Test, All Rights Reserved
FAQ      Privacy      Terms      Site Map      Site Map XML

Axiom Test Equipment
2610 Commerce Way Vista, CA 92081
Phone: (760) 806-6600